MERLIN LEGENDCommunications System Release 6.1 | Issue 1 |
System Planning | August 1998 |
3 Lines/Trunks |
|
Selecting Line/Trunk Options | Page |
|
|
b.In the Call Type cell, indicate the type(s) of calls that will be associated with the pattern by doing one of the following:
■If all outgoing calls will be voice calls (for example, Megacom WATS), write Voice.
■If all outgoing calls will be data only (for example, ACCUNET), write Data.
■If outgoing calls may be either voice or data (for example, SDN), write Both.
NOTE:
If you indicate Both, make sure the service can support both voice and data calls.
c.In the Service cell, write one of the following:
■AT&T Toll. (for 4ESS or 5ESS, see Form 3b, page 1) Megacom WATS, Megacom 800, ACCUNET SDS, Software Defined Network (SDN), MultiQuest, and Long Distance.
■5ESS Local. (For switch type 5ESS, see Form 3b, page 1) OUTWATS, 56/64 Digital, Virtual Private Network, and
INWATS.
■MCI Toll. (for
■
■Other.
d.If the system will need to delete digits, write the number of digits to delete (0−8). (The system deletes from the first digit onward.)
8.On Form 3b, check the appropriate box for the information that will be sent to the network for outgoing PRI calls. Check Extension Only, Base Number with Extension, or Line Telephone Number.
If you check Line Telephone Number, do the following:
■
■
Identify the trunk number.
Write the telephone number (up to 12 digits) that identifies the company as the caller in the Telephone Number to Send column.
NOTE:
There is no