Lucent Technologies 6.1 manual Tie

MERLIN LEGENDCommunications System Release 6.1		Issue 1
System Planning 555-661-112		August 1998
Index
		Page IN-9
	Lines/trunks
	adding to the system, 6–4
	assigning, 3–50
	capacity, 2–2
	connecting components with, 2–4
	Direct Inward Dial (DID), 3–42
	DS1 connectivity, 3–23
	hold disconnect interval, 3–14
	identifying jacks, 3–1
	incoming types, 3–6
	jacks, 3–2
	labels, 3–7
	loop-start disconnect, 3–12
	modules and jack types, 3–2
	NI-1 BRI connectivity, 3–44
	options, 3–11
	outmode signaling, 3–13
	planning overview, 3–1
	pools, 3–16
	Primary Rate Interface (PRI), 3–23
	QCC operator to receive calls, 3–15
	QCC queue priority, 3–15
	remote access, 3–18
	required, 6–2
	T1 service, 3–23,3–24
	T1 Switched 56 service, 3–28
	tie, 3–39
	toll type, 3–13
	Voice Messaging System, 3–10
	Local Area Networks (LANs)
	host computer data stations, 5–15,5–25
	workstation data stations, 5–15,5–25
	Logical IDs, 2–4
	Loop-Start
	disconnect signal, 3–12
	lines/trunks, 5–27
	reliable disconnect, 3–12
	trunk-to-trunk transfer, 3–12
	Loudspeaker paging jacks, 3–9
	LS-ID Delay, 3–4

M

Magic on Hold, 3–9 Maintenance Alarm jacks, 3–9 Marked System Speed Dial, 4–58 Marked system speed dial

and star codes, 2–12,4–58 Master extensions, 4–14

MCI 800 services, D–1 MCI 900 services, D–1 MCI Prism services, D–1 MCI Toll services, 3–34 MCI VNet services, D–1

Megacom 800 services, 3–3,3–24,D–1 Megacom WATS services, 3–3,D–1