MERLIN LEGENDCommunications System Release 6.1 | Issue 1 |
System Planning | August 1998 |
2 Control Unit Configuration |
|
Numbering the System | Page |
|
|
Jack for Primary Operator Position | 2 |
The factory setting for the primary operator position is the lowest extension jack on the first MLX or analog multiline telephone module. You cannot change the factory setting for the primary operator position.
The primary operator position uses two types of operator consoles:
■
■Queued Call Console (QCC). Can be assigned only to a digital extension jack, and the
If the system includes QCCs, the primary operator position must be a QCC.
Planning Form Instructions
Mark jack assignments on Form 2a:
1.Do one of the following:
■If the system uses a system programming console, proceed to Step 2.
■If the system does not use a system programming console, skip to Step 5.
2.Obtain the logical ID of the extension jack for the system programming console by referring to the System Operating Conditions heading, Form 1 (page 2).
3.Identify the logical ID for the system programming console by writing SPC beside the appropriate logical ID in the Log. ID column of Form 2a.
4.Write either the name of the person who will program the system or the location of the system programming console in the Person, Location, or Function column. Then proceed to Step 5.
5.Do one of the following:
■To indicate the primary QCC operator position for a system with one or more QCCs, proceed to Step 6.
■To indicate the primary DLC operator position for a system with one or more DLCs, skip to Step 7.
6.To indicate the primary QCC operator position:
■Locate the first extension jack showing a D (digital) jack type and write QCC beside the preprinted logical ID number.
■Write the name or location of the primary QCC operator in the Person, Location, or Function column.
■On Form 1 (page 2), write the extension of the QCC under System Consoles.
