Lucent Technologies 6.1 manual Merlin LEGENDCommunications System Release

MERLIN LEGENDCommunications System Release 6.1	Issue 1
System Planning 555-661-112	August 1998
4 Features
Group-Assigned Features	Page 4-40

12.Under the Overflow Threshold Time heading, do one of the following:

■To keep the factory setting and disable the Overflow Threshold Time, check the 0 seconds box.

■To change the threshold, check the second box and write the maximum number of seconds (1–900) calls wait in the queue in the space provided.

13.Under the Prompt-Based Overflow heading, do one of the following:

■To keep the factory setting and disable the Prompt-Based Overflow feature, check the Disabled box.

■To enable Prompt-Based Overflow, check the Enabled box.

14.Under the Group Type heading, do one of the following:

■To keep the factory setting of no automatic login, check the Auto Logout box.

■To change the factory setting from Auto Logout, do one of the following:

—Check the Auto Login box to indicate automatic login for an extension that should never be logged out, such as a data extension.

—Check the Integrated VMI box to indicate automatic login for a VMS that requires special signaling for integrated operation.

—Check the Generic VMI box to indicate automatic login for a VMS that does not require special signaling.

15.To specify the number of calls allowed into the group calling queue, under the Queue Control heading do one of the following:

■

■

To keep the factory setting, check the 99 calls box.

To change the threshold, check the second box and write the number of calls (0–98) in the space provided.

NOTE:

Specifying a Queue Control threshold of 0 indicates that no calls are allowed into the queue (Queue Control is turned off).

Proceed to the next section, “System Features.”