MERLIN LEGENDCommunications System Release 6.1

Issue 1

System Planning 555-661-112

August 1998

Prior Releases: Features and Enhancements

 

Release 3.1 Enhancements (March, 1996)

Page xxxvi

 

 

Default Pool Dial-Out Code

 

Restriction for All Extensions

0

The default setting for the pool dial-out code restriction (Hybrid/PBX mode only) is restricted. No extension or remote access user with a barrier code has access to pools until the restriction is removed by the system manager.

Default Outward Restrictions for VMI Ports

0

Ports assigned for use by voice messaging systems (generic or integrated VMI ports) are now assigned outward restrictions by default. If a voice messaging system must be allowed to call out (for example, to send calls to a user’s home office), the system manager must remove these restrictions.

!SECURITYlALERT:

Before removing restrictions, it is strongly recommended that you read

Appendix A, “Customer Support Information.”

Default Facility Restriction

0

Level (FRL) for VMI Ports

The default Automatic Route Selection (ARS) FRL for VMI ports is 0, restricting all outcalling.

Default for the Default Local Table

0

The default Automatic Route Selection (Hybrid/PBX mode only) FRL has changed to 2 for the Default Local table. System managers can easily change an extension default of 3 to 2 or lower in order to restrict calling. No adjustment to the route FRL is required.

New Maintenance Procedure for

0

Testing Outgoing Trunks

Technicians must enter a password in order to perform trunk tests.

!SECURITYlALERT:

The enhancements in Release 3.1 help increase the security of the MERLIN LEGEND System. To fully utilize these security enhancements, be sure to read and understand the information in the upgrade notes and in the relevant system guides.

Page 36
Image 36
Lucent Technologies 6.1 Default Pool Dial-Out Code Restriction for All Extensions, Default for the Default Local Table