Lucent Technologies 6.1 manual Extension Jack Pairs for Analog Telephones

Models: 6.1

1 588
Download 588 pages 27.3 Kb
Page 82
Image 82

MERLIN LEGENDCommunications System Release 6.1

Issue 1

System Planning 555-661-112

August 1998

2 Control Unit Configuration

 

Numbering the System

Page 2-24

 

 

Extension Jack Pairs for Analog Telephones

2

Use these instructions only if the system has analog multiline telephones.

Otherwise, skip to the next section, “Jacks for MLX Telephones”.

MLX telephones can use the Voice Announce to Busy feature or simultaneous voice and data without requiring a second extension jack.

Analog multiline telephones require an additional extension jack to use Voice Announce to Busy or voice and data. The jacks must be an odd-numbered analog extension jack and the next higher (even-numbered) analog extension jack. The system assigns individual extension numbers to each of the jacks. The extension number associated with the first (odd-numbered) extension jack in the pair is the telephones extension number. Calls cannot be placed to the extension number associated with the even-numbered extension jack. (For information about renumbering jacks, see System Renumbering later in this chapter.)

You can assign Voice Announce to Busy or voice and data to any of the analog multiline telephones in the system, but you cannot assign both to the same telephone.

Planning Form Instructions

On Form 2a, mark the pairs of jacks for analog multiline telephones that have

Voice Announce to Busy or voice and data:

1.In the Log. ID column, draw a box around the pair of extension jack numbers that you plan to assign to each analog multiline extension with either feature.

2.In the Person, Location, or Function column, next to the first (odd-numbered logical ID) number of each boxed pair, identify the extension by person or location.

3.In the Person, Location, or Function column, next to the second (even-numbered logical ID) number of each boxed pair, do one of the following:

For the Voice Announce to Busy feature, write voice/voice.

For voice and data, write voice/data.

Proceed to the next section, “Jacks for MLX Telephones”.

Page 82
Image 82
Lucent Technologies 6.1 manual Extension Jack Pairs for Analog Telephones