Lucent Technologies 6.1 manual Telephone and Extension Features

MERLIN LEGENDCommunications System Release 6.1			Issue 1
System Planning 555-661-112			August 1998
4 Features
	Telephone and Extension Features		Page 4-2
	Telephone and Extension Features	4

This section contains instructions for assigning some optional features to extensions. These features may be used by both system operators and general users:

■

■

■

■

■

■

■

■

■

Pool Dial-Out Code Restriction (Hybrid/PBX mode only)

Calling Restrictions

Forced Account Code Entry (not QCC)

Microphone Operation

Remote Call Forwarding (not QCC)

Fax Message-Waiting Receiver and Threshold

Trunk-to-Trunk Transfer

HotLine (single-line telephones only)

Service Observing (MLX only for Service Observer, any telephone for a Service Observing group member except QCC or CTI link)

NOTES:

1.Service Observing button is administrable only via centralized telephone programming.

2.Service Observing may be subject to federal, state, or local laws, rules, or regulations or require the consent of one or both of the call parties. You must check in your jurisdiction and comply with all applicable laws, rules, and regulations before using this feature. Failure to comply may result in severe penalties.

The system programmer and/or network administrator assigns these features.

There are additional extension features noted on the forms but not covered in this book. Individuals normally program these features at their telephones, although the system manager may also program these features using centralized telephone programming. You may, however, want to complete the information on the forms so they can serve as a complete summary of features for each extension. Detailed information about these and all features is contained in the Feature Reference. Instructions for using centralized telephone programming are included in System Programming. For users who want to program features on their own telephones, information and procedures are contained in the user and operator guides.

You may choose the Extension Copy feature to create a template that can then be copied to other similar extensions whose users require the same features. This feature is also described later in this section.