Lucent Technologies 6.1 manual Network Access Lines, Telephones, Optional Equipment†

MERLIN LEGENDCommunications System Release 6.1					Issue 1
System Planning 555-661-112					August 1998
F Unit Load Calculation
Unit Load Worksheet					Page F-5
		Module	Qty x	Unit Load	= Total
				Hybrid/PBX
		Equipment		or Modified	Key
		Network Access Lines*
	DID			1.0	0.0
	DS1			0.0	0.0
	NI-1 BRI			0.0	0.0
	GS/LS			0.0	0.0
	Tie			1.4	1.4
	Telephones
	MLX-5			0.9	1.2
	MLX-5D			0.9	1.2
	MLX-10			0.9	1.2
	MLX-10D			0.9	1.2
	MLX-10DP			0.9	1.2
	MLX-16DP			1.5	1.5
	MLX-28D			1.2	1.7
	MLX-20L			1.1	1.6
	BIS-10			0.9	1.1
	BIS-22			1.0	1.3
	BIS-22D			1.0	1.3
	BIS-34			1.1	1.5
	BIS-34D			1.1	1.5
	MLC-5			0.0	0.0
	MDC 9000			0.0	0.0
	MDW 9000			0.0	0.0
	10-Button Basic			0.9	1.1
	10-Button HFAI			1.0	1.2
	34-Button Basic			0.9	1.1
	34-Button DLX			1.2	1.7
	34-Button BIS			1.2	1.4
	34-Button BIS/DIS			1.2	1.4
	Single-Line Telephone			0.6	0.7
	Optional Equipment†
	Direct Station Selector‡			0.7	0.9
	General-Purpose Adapter			0.8	1.0
	Hands-Free Unit			0.8	1.0
	Headset Adapter			0.8	1.0
	EICON board			0.0	0.0
				Total Actual Unit Load

*Unit loads are computed for each trunk for trunk-type network access lines.

†The MFM has its own wall power unit located at the telephone and therefore is not added to the unit load calculation.

‡Up to two DSSs (one DSS for each MLX-28D or MLX-20L) can be powered from each control unit carrier. For example, a three-carrier system can have six system operator positions, each with one DSS powered from the control unit.