Lucent Technologies 6.1 manual Assigning Lines/Trunks, Forms Needed

MERLIN LEGENDCommunications System Release 6.1			Issue 1
System Planning 555-661-112			August 1998
3 Lines/Trunks
	Assigning Lines/Trunks		Page 3-50
	Assigning Lines/Trunks	3

This section contains instructions for assigning lines/trunks to telephones and

Direct-Line Consoles.

NOTE:

To assign lines/trunks to data-only stations, follow the instructions in

Chapter 5, “Data Communications.”

Forms Needed

■Form 2a, System Numbering: Extension Jacks

■Form 2b, System Numbering: Digital Adjuncts

■Use the following forms as appropriate for telephones and consoles in the system. Make one copy of the appropriate form for each extension.

—Form 4b, Analog Multiline Telephone

—Form 4d, MLX Telephone

—Form 4e, MFM Adjunct: MLX Telephone

—Form 4f, Tip/Ring Equipment

—Form 5a, Direct-Line Console (DLC): Analog

—Form 5b, Direct-Line Console (DLC): Digital

—Form 5c, MFM Adjunct: DLC

Planning Form Instructions

1.On page 1 of Forms 4b, 4d, 5a, and 5b, transfer the following user information from Form 2a, System Numbering: Extension Jacks to each copy of each of these telephone forms:

a.Write the logical ID in the Logical ID space.

b.Write the extension number in the Extension No. space.

c.Write the name of the person or the location of the equipment in the Person or Location space.

2.For any voice/voice or voice/data entries in the Person or Location column of Form 2a, indicate the type of extension jack pairs under the Extension Jack Pair heading on Forms 4b and 5a, by doing one of the following:

■Check the Voice Announce to Busy (voice/voice) box, and enter the logical ID and extension number under the Even-numbered jack heading.

■Check the Simultaneous Voice and Data (voice/data) box, and enter the logical ID and extension number under the Even-numbered jack heading.