MERLIN LEGENDCommunications System Release 6.1 | Issue 1 |
System Planning | August 1998 |
|
|
2Control Unit Configuration
Numbering the System | Page |
In Release 5.0 and later, if you want Computer Telephony Integration (CTI) capability, you must assign an MLX jack (port) as the CTI link. In Release 5.0 and later, the CTI link communicates with the PassageWay Telephony Services for Netware product implemented on a server running Netware 3.12 or 4.1 or later. In Release 6.1 and later, the CTI link may communicate with either the CentreVu
These CTI services enable a desktop computer running a certified PC application to provide
Planning Form Instructions
Use the floor plan and Equipment List (if available) to verify the location of any video stations and all remaining MLX telephones and adjuncts connected to them.
1.On Form 2a, mark the extension jack assignments for the video stations and the remaining MLX telephones:
a.In the Jack Type column, make sure D is checked next to the logical ID for each digital extension jack.
b.In the Person, Location, or Function column, identify each video station or MLX telephone by the user’s name, location, or function.
c.If an extension port will be a CTI link, Write CTI Link in the Person, Location, or Function column, and Label column, and put a check mark in the CTI Link column. If this is a CTI link, skip to Step 3. The CTI link port must be selected from ports 2, 3, 4, 6, 7, or 8. The CTI link port cannot be the potential operator port or the console programming port.
2.Using the information from Form 2a, mark the digital extension adjuncts and video stations on Form 2b, System Numbering: Digital Adjuncts:
a.Do one of the following:
—If the jack does not have an adjunct connected, write None in the Adjuncts column and skip to Step 3.
—If an adjunct is connected to the MLX telephone, proceed to Step b.
b.If an adjunct is connected to the MLX telephone, enter the type of adjunct (such as
