Lucent Technologies 6.1 manual Planning Form Instructions

MERLIN LEGENDCommunications System Release 6.1	Issue 1
System Planning 555-661-112	August 1998
5 Data Communications
Creating Data Hunt Groups	Page 5-41

Planning Form Instructions

Make enough copies of Data Form 2, Data Hunt Groups, for the number of data hunt groups you plan. For each DHG:

1.Write the group number (1–32) in the Group Number space.

2.Write the name of the group in the Group ID space.

3.Write the factory-set extension number for the DHG in the space provided.

NOTE:

Check all pages of Form 7d to be sure that you have not assigned the extension to a voice calling group.

4.If you want to reassign the factory-set extension number for the DHG, write the new number in the Renumber To space. Also write the new extension number you want to reassign in the calling group or DHG on Form 2d, System Numbering: Special Renumber.

5.Under the Purpose of Group heading, indicate the group use: local host computer access workstation, LAN access, and so forth.

6.In the Stations area, write the extension number of each member of the group in the Ext. No. column and the name of the person or location in the Person or Location column.

7.In the Trunks or Pool area, for each line/trunk or pool that you want to ring directly into the DHG, write the line/trunk number or pool extension number next to the logical ID in the Trunk or Pool column. (See Form 2b for the line/trunk numbers and Form 2c for the pool extension number.)