Lucent Technologies 6.1 manual Direct-Line Consoles, MLX Direct-Line Console

MERLIN LEGENDCommunications System Release 6.1		Issue 1
System Planning 555-661-112		August 1998
3 Lines/Trunks
	Assigning Telephone Buttons	Page 3-62
	Direct-Line Consoles	3

Use these instructions only if the system has one or more DLCs. Otherwise, proceed to Chapter 4, “Features,” to record feature assignments on the forms for each extension.

NOTE:

For more information on DLCs, see the Feature Reference.

The number of line, Direct Station Selector (DSS), and programmed feature buttons assigned to a DLC depends on the type of telephone and the number of lines/trunks connected to the system. The factory setting for DLCs is that, in addition to an SA Voice and an SA Ring button, or ICOM buttons, as many lines/trunks as possible are assigned to each console. Each line/trunk appears on a separate button, which means that the number of lines/trunks assigned is limited to the number of buttons on the console (up to a maximum of 32 buttons on the 34-button analog DLC).

If a DSS is present, the system assigns a DSS button for each extension number associated with an extension and special-feature buttons that are used by the DLC operator for call-handling functions.

Figure 3–6 and Figure 3–7 show initial line/trunk and feature assignments for MLX and analog DLC consoles. Refer to the appropriate figure as you select line/trunk assignments for DLCs.

NOTE:

System Access buttons appear on DLCs in Hybrid/PBX mode. Intercom buttons appear on DLCs in Key or Behind Switch mode.

22				24
21				23
5		3	8	10
4		2	7	9
3		1	6	8
2	SA	Icom		7
	Voice		5
1	SA	Icom		6
	Ring		4

24			28
23			27
15	13	18	20
14	12	17	19
13	11	16	18
12	10	15	17
11	9	14	16

28

20

Figure 3–6. MLX Direct-Line Console