Lucent Technologies 6.1 manual Form, System Planning, Line/Trunk Capacity, Extension Capacity

MERLIN LEGEND® Communications System Release 6.1

Form 1

System Planning

Line/Trunk Capacity*
			Trunks	Total Trunks
Module	Number of		Supported	by Module
Type	Modules		by Module	Type
400 LS/TTR¶		x	4
800		x	8
408		x	4
400 GS/LS/TTR		x	4
800 GS/LS		x	8
408 GS/LS		x	4
408 GS/LS-MLX		x	4
400EM		x	4
800 DID†		x	8
100D		x	24
800 GS/LS-ID		x	8
800 NI-BRI**		x	16
System Totals
Extension Capacity*
			Physical	Physical			Total
Module	Number of		Jacks per	Jacks by		Extensions	Extensions
Type	Modules		Module	Module Type		Assigned	Assigned
008 MLX		x	8		x	2
008 ATL		x	8		x	1
408¶		x	8		x	1
408 GS/LS		x	8		x	1
408 GS/LS-MLX		x	8		x	2
012		x	12		x	1
016		x	16		x	1
008 OPT		x	8		+ (___x4)§
MERLIN LEGEND Mail	N /A	x	7	N /A	x	12††
System Totals

*System capacity for Personal Directories is decreased by one whenever an MLX-20L telephone is connected to an MLX port.

†Hybrid/PBX mode only.

‡The 100D module has one physical jack that supports 24 trunks.

§The 008 OPT module is assigned 12 extension numbers although there are only 8 physical extension jacks.

¶Although this MERLIN II module is supported, the 400 GS/LS/TTR, the 408 GS/LS, and the 408 GS/LS-MLX are the recommended modules.

**The 800 NI-BRI module has 8 physical jacks that support 16 trunks. Up to five 800 NI-BRI modules (or any combination of LINE/TRUNK modules up to the system maximum of 80 trunks) may be placed in the system. However, due to limitations in the 391A, 391A1, and 391A2 power supplies, the number of 800 NI-BRI modules plus 100D modules cannot exceed 3 per carrier.

††The MERLIN LEGEND Mail module has 7 dedicated internal ports, but assigns 12 total extensions.

Form 1-1