Lucent Technologies 6.1 manual Assigning Telephone Buttons, Telephones in Hybrid/PBX Mode

MERLIN LEGENDCommunications System Release 6.1			Issue 1
System Planning 555-661-112			August 1998
3 Lines/Trunks
	Assigning Telephone Buttons		Page 3-52
	Assigning Telephone Buttons	3

This section contains instructions for assigning buttons to:

■Telephones in Hybrid/PBX mode

■Telephones in Key and Behind Switch mode

■DLCs

Forms Needed

■Form 4b, Analog Multiline Telephone

■Form 4d, MLX Telephone

■Form 4e, MFM Adjunct: MLX Telephone

■Form 4f, Tip/Ring Equipment

■Form 5a, Direct-Line Console (DLC): Analog

■Form 5b, Direct-Line Console (DLC): Digital

■Form 5c, MFM Adjunct: DLC

Telephones in Hybrid/PBX Mode 3

This section contains instructions for assigning the following kinds of buttons to telephones, or to adjuncts connected to an MLX telephone using an MFM (excluding QCC operator positions):

■System Access Ring (SA Ring) button

■System Access Voice (SA Voice) button

■System Access Originate Only (SA Orig Only) button

■Shared System Access (SSA) button

■Personal line button

■Pool button

■Loudspeaker Paging button

The system automatically assigns certain kinds of line buttons, depending on the type of equipment. For nonoperator multiline telephones, the system assigns SA Ring, SA Voice, and SA Orig Only buttons (see Figure 3–2 and Figure 3–3).