Lucent Technologies 6.1 manual Pool Dial-Out Code Hybrid/PBX Mode Only, Calling Restrictions

MERLIN LEGENDCommunications System Release 6.1		Issue 1
System Planning 555-661-112		August 1998
5 Data Communications
	Assigning Features to Data Stations	Page 5-37
	Pool Dial-Out Code (Hybrid/PBX Mode Only)	5

Use these instructions only if the system is operating in Hybrid/PBX mode.

The factory setting is for all extensions, including data stations, to be restricted from using all dial-out access codes. You can unrestrict data stations to allow the user access to one or more trunk pools by dialing the pool dial-out code.

The dial-out code restriction places data calls only on specific trunk pools. For example, you may want to restrict users to trunk pools that are made up of special data lines such as PRI channels used for data services, or to reserve other trunk pools for voice communications only.

Planning Form Instructions

Use the Optional Features section of Data Form 1a or 1b for each data extension to record your decisions:

1.In the Optional Features section, under the Pool Dial-Out Code Restriction heading:

—Check Unrestricted from following codes and list the codes in the space provided for unrestricted use.

—Check Restricted from following codes and list the codes in the spaces provided for restricted use. The factory setting is restricted for all codes.

2.Use Form 2c, System Numbering: Line/Trunk Jacks to locate the dial-out codes for each pool that the data station is restricted from using. Write the dial-out codes on the lines below the Yes box.

Calling Restrictions 5

When the system is first set up, all data stations are restricted. This means that only inside (intercom) calls may be made, local and long-distance calls may not be placed from any data station. However, you can unrestrict selected data stations to allow local and long-distance calls.

Planning Form Instructions

Use the Optional Features section of Data Form 1a or 1b for each data station to record your decisions. Under the Call Restriction heading, do one of the following:

■If you do not want calling restrictions for this data station, check the Unrestricted box.

■If you want the data station restricted from making any outside calls, check the Outward Restrict box (factory setting).

■If you want the data station restricted from making long-distance calls (intercom and local calls can be made), check the Toll Restrict box.