Lucent Technologies 6.1 manual Recording System Operating Conditions, Programming Equipment

MERLIN LEGENDCommunications System Release 6.1			Issue 1
System Planning 555-661-112			August 1998
2 Control Unit Configuration
	Recording System Operating Conditions		Page 2-7
	Recording System Operating	2
	Conditions

This section contains instructions for recording the following system operating conditions:

■Programming equipment to be used and its extension jack assignment

■Mode of operation

■Language choice

■Enable and disable Automatic Maintenance Busy

■A reminder to set the system date

■Backup schedule

■Identifying system console extensions

■Second Dial Tone Timer

■Identifying system applications

Forms Needed

Form 1, System Planning

Programming Equipment 2

Two types of equipment can be used for system programming:

■An MLX-20L telephone identified as a system programming console. The telephone is connected to the first (lowest) extension jack (which is factory-set for system programming) on the first MLX module.

■A personal computer with System Programming and Maintenance (SPM) software. The PC connects to the lowest jack on the processor module.

Planning Form Instructions

1.Under the Programming Equipment heading in the System Operating Conditions section on Form 1 (page 2), do one of the following:

■If the system will use a system programming console, check the System Programming Console box.

■If the system will use a PC with SPM software, check the PC with SPM Software box.

NOTES:

1.In conjunction with the MLX-20L telephone and the PC, a PCMCIA card is required for Release 3.0 and later of the communications system. Check the box labeled PCMCIA Memory Card.

2.The first (lowest) extension jack on the first MLX module is factory-set for system programming and as the primary operator position. Since the primary operator position cannot be reassigned, you may want to change the system programming assignment to ensure that future programming sessions do not interfere with the operator’s work.