Lucent Technologies 6.1 manual System Features, Form 8a-1

MERLIN LEGEND® Communications System Release 6.1

Form 8a

System Features

Transfer Options**

Return Time Interval†

❑4 rings ✦

❑0 rings

❑_____ rings (1–9)

One -Touch Call Handling

❑One-Touch Transfer ✦

❑Manual Completion

❑Automatic Completion ✦

❑One-Touch-Hold

Transfer Audible

❑Music On Hold ✦

❑Ringback

Type of Transfer

❑Voice button

❑Ring button ✦

Camp-On Return Time

❑90 seconds ✦

❑_____ seconds (30–300)

Call Park Return Time

❑180 seconds ✦

❑_____ seconds (30–300)

Automatic Callback Interval

❑3 rings ✦

❑_____ rings (1–6)

Extension Status

❑Hotel

❑Assign to operator positions

______ ______ ______ ______

______ ______ ______ ______

❑Group Calling/CMS ✦

SMDR Options
Call Report Format	Call Length‡
❑ Basic ✦	❑ 40 seconds ✦
❑ ISDN	❑ _____ seconds (0–255)
Calls Reported (non-UDP)	Calls Reported (UDP)
❑ Incoming and outgoing ✦	❑ Incoming and outgoing ✦
❑ Outgoing only	❑ None

Talk Time

❑Enabled

❑Disabled ✦

Inside Dial Tone

❑Inside ✦

❑Outside

Reminder Service Cancel

❑No

❑Yes, _____ time of day

Calls to Unassigned Extensions

❑QCC Queue _________§

❑Extension ✦, No. __________ (default is the primary operator extension)

❑Calling Group, Extension No. __________

Recall Timer

❑350 ms

❑450 ms ✦

❑650 ms

❑1 sec

Rotary

❑Delay ✦

❑No Delay

Note: If you use equipment that rebroadcasts music or other copyrighted material, you may be required to obtain a copyright license from, and pay license fees to, a third party such as the American Society of Composers, Artists, and Producers (ASCAP) or Broadcast Music Incorporated (BMI). Or you can purchase a Magic-on-Hold system, which does not require you to obtain such a license, from Lucent Technologies or an authorized representative.

✦Factory Setting

*Beginning with Release 2.1; calls received on personal lines with Do Not Disturb on will go immediately to Coverage instead of waiting for the Cover Delay Interval.

†If the system has AUDIX Voice Power/FAX Attendant System, Integrated Administration will automatically set the Return Time Interval to “6.”

‡For systems where the majority of lines are PRI, the SMDR Call Length should be one second.

**Transfer features (and any feature that requires more than one SA button) can be disabled on single-line telephones by removing all but one SA button via Centralized Programming.

§Hybrid/PBX mode only

Form 8a-1