Lucent Technologies 6.1 manual MCI Prism, DMS Inwats DMS Outwats DMS FX

MERLIN LEGENDCommunications System Release 6.1	Issue 1
System Planning 555-661-112	August 1998
5 Data Communications
Assigning Lines/Trunks to Data and Video Stations	Page 5-29

The 100D module supports any combination of the following AT&T

Switched Network services:

—ACCUNET Switched Digital Service for 56-kbps and 64-kbps restricted and 64-kbps clear (unrestricted) circuit-switched data calls (PRI only)

—ACCUNET Switched 56 Service for 56-kbps (restricted or unrestricted) data calls (T1 only)

—Megacom 800 for incoming domestic toll-free voice calls

—Megacom WATS service for outgoing domestic long-distance voice calls

—Software-Defined Network (SDN) for circuit-switched voice and data calls at up to 56 kbps

■In Release 4.2 and later systems, these MCI services are also available:

—MCI PRISM

—MCI Vnet

—MCI 800

—MCI 900

■In Release 4.2 and later systems, these local exchange carrier services are also available:

—DMS Private

—DMS INWATS

—DMS OUTWATS

—DMS FX

—DMS Tie Trunk

■NI-1 BRI. Basic Rate Interface (BRI) is a protocol within the ISDN standard that provides digital voice, data, and video connectivity. NI-1 BRI facilities connect to a jack on the 800 NI-BRI module, with each facility providing two B-channels per jack (total of 16 NI-1 BRI channels per 800 NI-BRI module). BRI facilities provide data rates of up to 64-kbps clear (unrestricted) circuit-switched data calls per B-channel (128-kbps total for 2B Data).

To assign lines/trunks to data stations, you decide on the types of line buttons that are assigned to the data communications equipment at each data station. The data stations are:

■Analog voice and modem data stations and MLX voice and modem data stations

■MLX voice and ISDN terminal adapter data stations, including telephones

■Modem data-only stations

■ISDN terminal adapter data-only stations

■Digital data/video stations