Lucent Technologies 6.1 manual Transfer Options, Planning Form Instructions

MERLIN LEGENDCommunications System Release 6.1		Issue 1
System Planning 555-661-112		August 1998
4 Features
	System Features	Page 4-42
	Transfer Options	4

This section contains instructions for setting the following Transfer feature options to allow users to transfer outside or inside calls to another telephone:

■

■

■

■

Transfer Return Interval

One-Touch Transfer

Transfer Audible

Type of Transfer

NOTES:

1.Transfer features, and any other feature that requires more than one SA button, can be disabled on Single-line telephones by removing all but one SA button through centralized programming. Refer to Form 4f, Tip/Ring Equipment.

2.If customers with CTI applications will frequently use the Conference feature, set the system Transfer Type to Ring and not Voice. This will minimize the possibility of broadcasting a conference over an unattended speakerphone.

3.If the DLC operator uses the DSS to transfer calls across a private network, the operator may want to use manual completion to avoid transfer without return to busy. If you subscribe to ANI or ICLID and automatic completion is selected, the ANI and ICLID information will be sent but calls will not return on busy.

Planning Form Instructions

1.Under the Return Time Interval heading in the Transfer Options section of Form 8a, do one of the following:

■To keep the factory setting, check the 4 rings box.

■To indicate no return for transferred calls, check the 0 rings box.

■To change the factory-set number of rings, check the third box and write the number of rings (1–9) in the space provided.

2.Under the One-Touch Call Handling heading, do one of the following:

■To keep the factory setting, check the One-Touch Transfer box and do one of the following:

—Check the Automatic Completion box to keep the factory-set automatic completion of transfers.

—Check the Manual Completion box to change the factory setting to manual completion.

■To change from One-Touch Transfer to One-Touch Hold, check the One-Touch Hold box.