Lucent Technologies 6.1 manual Control Unit Configuration

MERLIN LEGENDCommunications System Release 6.1	Issue 1
System Planning 555-661-112	August 1998

2 Control Unit Configuration

Page 2-1

2 Control Unit Configuration 2

After you have completed the preplanning tasks described in Chapter 1, “Before You Begin”, you can plan the control unit configuration. Planning the control unit configuration consists of the following tasks:

1.Planning Module Placement. Calculate the system’s line/trunk and extension capacity according to the number of module types; then map out the placement of the modules on the Control Unit Diagram.

2.Recording System Operating Conditions. Note the system’s type of programming equipment, it’s mode and language choice, and whether the Automatic Maintenance Busy feature is to be enabled or disabled.

3.Numbering the System. Decide the order in which to connect the telephones and other equipment to the control unit based on the customer’s needs and applications. Determine whether the system-assigned extension numbers are appropriate for the customer’s business or if they need to be renumbered.

This chapter contains instructions for completing each of these tasks.