Lucent Technologies 6.1 manual NI-1 BRI Review G-2

MERLIN LEGENDCommunications System Release 6.1	Issue 1
System Planning 555-661-112	August 1998
G NI-1 BRI Review	Page G-2

To properly order and program NI-1 BRI service, it may be necessary to contact the local service provider to determine what services are available and the type of switching equipment used. See Appendix H, “NI-1 BRI Provisioning” for detailed information that the local service provider may require in order to supply the necessary connections.

1.On page 1, fill in the customer name, telephone number, and address.

NOTE:

Reference Number is filled in by SDSC.

2.Fill in the Order Number.

3.Identify the personnel handling the account:

a.Account Executive’s name and telephone number.

b.System Consultant’s name and telephone number.

4.Identify the NI-1 BRI facility vendor by writing the vendor’s name under the NI-1 BRI Vendor heading, along with the contact person’s name and telephone number.

5.Under the Installation heading:

a.Write the “Due Date” on which the installation is scheduled to be complete.

b.Write the date the equipment is scheduled for delivery to the customer in the Materials-on-Job Date space.

6.Under the Installation Contacts heading, list the names and telephone numbers of the personnel responsible for the equipment order and its installation:

a.(Order) Implementor

b.SDSC Manager

c.National Technical Service Center (NTSC) Engineer

d.Data Services Organization (DSO) Manager

7.Under the question about whether the order has been placed:

■If the order has been placed, check the Yes box and fill in the expected service turn on date.

■If the order has not been placed, check the No box.

8.On page 2, enter the type of BRI service to be ordered. Since MERLIN LEGEND Release 4.0 supports only National ISDN-1 BRI (2B+D) service, enter NI-1 BRI in the space provided under the Type of Service heading.

9.Contact the local service provider and determine what type of CO switch serves your area (such as, Lucent Technologies 5ESS, Northern Telecom DMS-100, or Siemens SSC EWSD). Enter this information under the Type of CO Switch heading on page 2 of the form.