Siemens 200 Word Order R40,062, Map ID R40,063, Modbus Register Types Description Start

Modbus Register Types

Type	Description	Start	#R 1	Data Type	Read/
					Write
Point	Temperature (2)	41,030	2	–50 to 150	R
Data	Totalizer for points 1	41,040	4	UINT32	R/W
	and 2 [MR 200]
	Discrete Inputs (2)	41,070	1	Bit Mapped	R
	Relay Outputs (3 or	41,080	1	Bit Mapped	R/W
I/O	6)
	mA Input (1)	41,090	1	0000 to	R
	[MR 200]			20,000
	mA Output (2)	41,110	2	0000 to	R/W
				20,000
	Pump on Setpoint (3	41,420	6	0000 to	R/W
	or 6)			10,000
	Pump off Setpoint (3	41,430	6	0000 to	R/W
Pump	or 6)			10,000
Control	Pumped Volume (2)	41,440	4	UINT32	R
	[MR 200]
	Pump Hours (3 or 6)	41,450	12	UINT32	R
	Pump Starts (3 or 6)	41,470	6	0000 to	R
				10,000
Parameter	Access	43,998 to 46999			R/W

1.Maximum registers shown; fewer may be used depending on options installed.

The MultiRanger was designed to make it easy for master devices to get useful information via Modbus. This chart gives an overview of the different sections. A more detailed explanation of each section follows below.

Word Order (R40,062)

This determines the format of unsigned, double-register integers (UINT32).

•0 indicates that the most significant word (MSW) is given first

•1 indicates that the least significant word (LSW) is given first

See Unsigned Double Precision Integer (UINT32) on page 107 for more information.

Note: Additional information is available from our Web site at www.siemens.com/

processautomation

Map ID (R40,063)

This value identifies the register map used by the MultiRanger. See P782 Parameter Index Location on page 96.

See also Parameter Access (R43,998 – R46,999) on page 102 for details.

Page 98 MultiRanger 100/200 – INSTRUCTION MANUAL 7ML19981FB06