Siemens 200 instruction manual Quick Start P001 to P007, P000 Lock, P001 Operation

P000 Lock

Notes:

•This lock only applies to the handheld programmer: it does not lock access through communications.

•A remote master can change configuration if P799 is set to allow this.

Secures the MultiRanger from changes via the handheld programmer.

Primary Index	Global
	1954	*	OFF (programming permitted)
Values	-1		Simulation Controls (relays energize based on simu-
			lated level)
	other		lock activated (programming secured)
Related			•	Simulation on page 85

WARNING:

Use this lock as backup security only. It uses a fixed value which can be discovered by unauthorized personnel.

Access this parameter directly (type 000) and enter any value (except 1954) to secure programming lock. To unlock the MultiRanger, access this parameter and enter 1954.

Quick Start (P001 to P007)

P001 Operation

Sets the type of measurement required for the application.

Primary Index	Single Point Model			Dual Point Model
	Global			Transducer
	0		Out-of-service
	1		Level – how full the vessel is (MR 200: volume – P050)
	2		Space – how empty the vessel is (MR 200: ullage – P050)
Values	3	*	Distance – distance from transducer to material
	4		DPD – dual point difference [MR 200]
	5		DPA – dual point average [MR 200]
	6		OCM – flow rate in an open channel [MR 200]
	7		Pump Totalizer – total pumped volume [MR 200]
Alters	•	P600	Primary Measuring Device

7ML19981FB06 MultiRanger 100/200 – INSTRUCTION MANUAL Page 119

Parameters