Siemens 200 Profile Records P330 to P337, P322 LCD Total Low MR, P323 LCD Total High MR

Totalizer units are dependent upon programming. Enter zero 0 (if required) to reset the totalizer to zero. Alternatively, enter any other (applicable) value, to preset the totalizer to the necessary value.

Note: A second point is available only if the Dual Point Feature is enabled.

P322 LCD Total Low [MR 200]

View and/or alter the four least significant digits of the totalizer value.

Primary Index		Single Point Model		Dual Point Model
	Global			Transducer
Values	Range: 0.000 to 9999
	• P630 LCD Totalized Multiplier
Related	•	P633	LCD Totalized Decimal Position
	•	P737	Primary Reading

P323 LCD Total High [MR 200]

View and/or alter the four most significant digits of the totalizer value.

Primary Index		Single Point Model		Dual Point Model
	Global			Transducer
Values	Range: 0.000 to 9999
	• P630 LCD Totalized Multiplier
Related	•	P633	LCD Totalized Decimal Position
	•	P737	Primary Reading

Profile Records (P330 to P337)

WARNING:

These parameters are for authorized service personnel or technicians familiar with Siemens Milltronics echo processing techniques.

These features can record up to ten Echo profiles, initiated manually (P330), or automatically (P331 et al). If ten Profiles are already saved, addresses 1 through 10 are filled, the oldest automatically initiated record is overwritten. Manually initiated records are not automatically overwritten. All records are automatically deleted in the event of a power interruption.

When a record is displayed, results are based on current programming (which may have been altered since the record was saved). This permits the effect on the echo profile to be observed when changing an echo parameter.

7ML19981FB06 MultiRanger 100/200 – INSTRUCTION MANUAL Page 159

Parameters