Siemens 200 instruction manual Appendix a Index Types, Global View only Breakpoint

Appendix A: Index Types

Index types

Appendix A: Index

Name

Global

View only

Breakpoint

Dimension Discrete Input Echo Profile Level Point1 mA input1 mA output1 Comm. Port Relay Transducer2

Description

This parameter applies to the entire unit This parameter can not be set, only viewed

Indexed by breakpoint

Indexed by PMD dimension Indexed by discrete input Indexed by stored echo profile Indexed by level point Indexed by mA input Indexed by mA output Indexed by communications port Indexed by relay

Indexed by transducer

# of indexes

n/a

n/a

Parameter depen-

dent up to 7 2 10

1, 2 or 3 1

0 or 2

2

3 or 6

1 or 2

Types

1.MultiRanger 100: The two level points are: Transducer One and Trans- ducer Two.

Level point typically has 1 index in Single Point Mode (standard), and 2 indexes in Dual Point Mode (optional).

MultiRanger 200: The three level points are: transducer 1, transducer 2, and the calculated point which can be difference (P001=4) or average (P001=5).

Level point typically has 1 index in Single Point Mode (standard), and 2 indexes in Dual Point Mode (optional). A third index is available in both modes when Operation (P001) is set for DPD (P001=4) or DPA (P001=5).

2.MultiRanger 200: The number of indexes available in Single Point Mode (standard) is typically 1, but can be expanded to 2 if Operation (P001) is set for DPD (P001=4) or DPA (P001=5).

In Dual Point Mode (optional), the number of available indexes is always 2.

7ML19981FB06 MultiRanger 100/200 – INSTRUCTION MANUAL Page 223