Siemens 200 This document is available in bound version, Manual for agreement with, Versions

Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected equipment. These warning notices are accompanied by a clarification of the level of caution to be observed.

Qualified Personnel: This device/system may only be set up and operated in conjunction with this manual. Qualified personnel are only authorized to install and operate this equipment in accordance with established safety practices and standards.

Unit Repair and Excluded Liability:

•The user is responsible for all changes and repairs made to the device by the user or the user’s agent.

•All new components are to be provided by Siemens Milltronics Process Instruments Inc.

•Restrict repair to faulty components only.

•Do not reuse faulty components.

Warning: Cardboard shipping package provides limited humidity and moisture protection. This product can only function properly and safely if it is correctly transported, stored, installed, set up, operated, and maintained.

This product is intended for use in industrial areas. Operation of this equipment in a residential area may cause interference to several frequency based communications.

Note: Always use product in accordance with specifications.

Copyright Siemens Milltronics Process	Disclaimer of Liability
Instruments Inc. 2009. All Rights Reserved
This document is available in bound version and in	While we have verified the contents of this
electronic version. We encourage users to purchase	manual for agreement with the
authorized bound manuals, or to view electronic versions	instrumentation described, variations
as designed and authored by Siemens Milltronics Process	remain possible. Thus we cannot
Instruments Inc. Siemens Milltronics Process Instruments	guarantee full agreement. The contents of
Inc. will not be responsible for the contents of partial or	this manual are regularly reviewed and
whole reproductions of either bound or electronic	corrections are included in subsequent
versions.	editions. We welcome all suggestions for
	improvement.
	Technical data subject to change.

MILLTRONICS®is a registered trademark of Siemens Milltronics Process Instruments Inc.

Contact SMPI Technical Publications	European Authorized Representative
at the following address:
Technical Publications	Siemens AG
Siemens Milltronics Process Instruments Inc.	Industry Sector
1954 Technology Drive, P.O. Box 4225	76181 Karlsruhe
Peterborough, Ontario, Canada, K9J 7B1	Deutschland
Email: techpubs.smpi@siemens.com

•For a selection of Siemens Milltronics level measurement manuals, go to:

www.siemens.com/processautomation. Under Process Instrumentation, select Level Measurement and then go to the manual archive listed under the product family.

•For a selection of Siemens Milltronics weighing manuals, go to:

www.siemens.com/processautomation. Under Weighing Technology, select Continuous Weighing Systems and then go to the manual archive listed under the product family.

© Siemens Milltronics Process Instruments Inc. 2009