Siemens 200 instruction manual P606 Time Units MR, P607 Flowrate Decimal MR

Parameters

P606 Time Units [MR 200]

Determines the units used to display current flow and logging flow values.

Primary Index		Single Point Model		Dual Point Model
	Global			Transducer
	1		seconds
Values	2		minutes
	3		hours
	4	*	days
Alters	•
Altered By	•	P608 Flowrate Units

This is used when the Primary Measuring Device is Ratiometric (P608=0).

Example

Conditions		Enter
•	Flowrate display: millions of gallons/day,	•	376.5 for Maximum Flow (P604)
•	Maximum flowrate is 376,500,000 gallons/day	•	and 4 for Time Units (P606).

P607 Flowrate Decimal [MR 200]

The maximum number of decimal places to be displayed.

Primary Index		Single Point Model		Dual Point Model
	Global			Transducer
	0		no digits after the decimal point
Values	1		1 digit after the decimal point
	2		2 digits after the decimal point
	3		3 digits after the decimal point
Altered By	•	P060 Decimal Position

In RUN mode, the number of decimal places displayed is automatically adjusted (if necessary) to prevent the number of Flowrate digits from exceeding display capabilities.

The maximum number of head decimal places is controlled by Decimal Position (P060).

Page 170 MultiRanger 100/200 – INSTRUCTION MANUAL 7ML19981FB06