Chapter 7 VPIM Networking

Procedures for Setting Up Cisco Unity to Use VPIM Networking

Setting Permissions on Active Directory Containers Used for Importing Subscribers

If you will be importing contacts from two or more containers (for all of the Cisco Unity servers combined), the Cisco Unity message store services account on each Cisco Unity server must be granted SendAs permission on every container from which contacts will be imported on every Cisco Unity server in the forest. Otherwise, identified subscriber messaging may not work between Cisco Unity servers. For example, if CiscoUnityServer1 will import contacts from Container1 and Container2, and if CiscoUnityServer2 will import contacts from Container3 and Container4, Cisco Unity message store services account on each Cisco Unity server must have SendAs permission for all four containers.

To Set the Applicable Permissions

Step 1 On the Cisco Unity server desktop, double-click the Cisco Unity Tools Depot icon.

Step 2 In the left pane of the Tools Depot window, expand Administration Tools.

Step 3 Double-clickPermissions Wizard.

Step 4 Do the following:

Choose the same Active Directory account for the Cisco Unity message store services account:

Click Next without changing any options until you arrive at the Choose the Cisco Unity Message Store Services Account page.

Choose the same Active Directory account for the Cisco Unity message store services account on every Cisco Unity server.

Choose the applicable containers:

Click Next without changing any options until you arrive at the Choose Active Directory Containers for Import page.

Choose all of the containers from which users will be imported for every Cisco Unity server in the forest.

Step 5 Click Next without changing any options until you complete the wizard.

Step 6 Repeat Step 1 through Step 5 on each Cisco Unity in the forest.

Enabling Identified Subscriber Messaging

If the system is using failover, you must make this change on both the primary and secondary servers because the setting is stored in the registry.

To Enable Identified Subscriber Messaging

Step 1 In the Cisco Unity Administrator, go to the System > Configuration Settings page.

Step 2 In the Identified Subscriber Messaging section, uncheck the Disable Identified Subscriber Messaging check box.

Identified subscriber messaging for subscribers on the same Cisco Unity server is enabled when the check box is unchecked. By default, the box is unchecked.

Step 3 Click the Save icon.

 

 

Networking Guide for Cisco Unity Release 5.x (With Microsoft Exchange)

 

 

 

 

 

 

OL-13844-01

 

 

7-35

 

 

 

 

 

Page 161
Image 161
Cisco Systems 5.x manual Enabling Identified Subscriber Messaging