2-7
Networking Guide for Cisco Unity Release 5.x (With Microsoft Exchange)
OL-13844-01
Chapter 2 Digital Networking
Procedures for Setting Up Cisco Unity to Use Digital Networking
To Set the Addressing Search Scope
Step 1 In the Cisco Unity Administrator, go to the Network > Primary Location > Addressing Options page
and set the addressing options as follows:
• To allow subscribers that are created on the local Cisco Unity server to address messages to
subscribers on other Cisco Unity servers that access the same directory, select Dialing Domain or
Global Directory, as applicable.
• If you are using blind addressing to a Cisco Unity server in a separate directory, or to another voice
messaging system, set the Blind Addressing Allowed Locations setting to something other than
None, as applicable.
Step 2 If you want subscribers to be able to do a spell-by-name search that is limited to a specific location,
check the Include Locations in Searches check box.
Step 3 Click the Save icon.
Setting the Directory Handler Search Scope
To Set the Directory Handler Search Scope
Step 1 In the Cisco Unity Administrator, go to the Call Management > Directory Handlers > Profile page. If
you are using only the default directory handler, skip to Step 3.
Step 2 Click the Find icon to find and view the directory handler that you want to change.
Step 3 Go to the Search Options page, and click Dialing Domain.
Step 4 Click the Save icon.
Step 5 Repeat Step 2 through Step 4 for each directory handler that you want to change.
Setting the Automated Attendant Search Scope
By default, callers who reach the opening greeting for your organization can be transferred only to
subscribers who are associated with the local Cisco Unity server. If you want to set up the automated
attendant so that callers can be transferred to subscribers who are associated with other Cisco Unity
servers in the same dialing domain, change a registry setting as described in the following procedure.
The automated attendant search scope must be set to search the dialing domain in order for the following
features to work:
• Identified subscriber messaging between Cisco Unity servers in the dialing domain
• Cross-server transfers from the automated attendant of one Cisco Unity server to another
Cisco Unity server in the dialing domain
Note If the system is configured for failover, the registry changes must be made on both the primary and
secondary Cisco Unity servers.