Cisco Systems 5.x manual Before Creating Trusted Internet Subscriber Accounts

Chapter 4 Internet Subscribers

Creating Internet Subscriber Accounts

Note The System Administration Guide for Cisco Unity is available at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_maintenance_guides_list.html.

Before Creating Trusted Internet Subscriber Accounts

Before creating Trusted Internet subscriber accounts, you must also consider the following two issues in addition to the issues listed in the “Before Creating Internet Subscriber Accounts” section on page 4-2:

1.Trusted Internet Locations

You must first create as least one Trusted Internet Location.

You can create Trusted Internet delivery locations by using the Cisco Unity Administrator or the Cisco Unity Bulk Import wizard.

To Create Trusted Internet Delivery Locations by Using the Cisco Unity Administrator

Step 1 In the Cisco Unity Administrator, go to the Network > Delivery Locations > Profile page. Step 2 Click the Add icon.

Step 3 Enter a meaningful name for the location.

Step 4 Enter the Dial ID, which identifies the location in Cisco Unity, and which subscribers use to blind address messages to recipients at this location.

Step 5 Select Trusted Internet as the Destination Type for the location.

Step 6 Click Add.

Step 7 Record a voice name for the location.

Step 8 If you are using Secure Messaging, indicate whether to have outgoing messages decrypted. Step 9 Click the Save icon.

If you prefer to create Trusted Internet delivery locations by using the Cisco Unity Bulk Import wizard, see the Cisco Unity Bulk Import wizard Help for instructions.

2.Voice Connector for Exchange 2000

You must install the Voice Connector for Trusted Internet Locations.

Caution The Voice Connector for Exchange 2000 can be installed on an Exchange 2000 or an Exchange 2003 server, but it cannot be installed on an Exchange 2007 server.

Do the following two procedures in the order listed.

The following procedure is for installing Voice Connector version 12.0(1), which ships with

Cisco Unity 5.0(1). We recommend that you first check for a later version of the Voice Connector, and that you install that version instead. Follow the installation instructions in the release notes for the applicable version. To check for a later version, go to the Cisco Unity Voice Connector for Exchange Software Download page at http://www.cisco.com/cgi-bin/tablebuild.pl/unity-voice-connector.

Networking Guide for Cisco Unity Release 5.x (With Microsoft Exchange)

4-4 OL-13844-01