7-12
Networking Guide for Cisco Unity Release 5.x (With Microsoft Exchange)
OL-13844-01
Chapter 7 VPIM Networking
Procedures for Setting Up Cisco Unity to Use VPIM Networking
Step 17 If you did not check the Secure Messaging Service check box in Step 7, skip to Step 18. Otherwise, do
the following sub-steps in the Cisco Unity Secure Messaging Service Setup wizard:
a. On the Welcome screen, click Next.
b. On the Choose Destination Folder dialog, specify the destination, and click Next.
c. Optionally, on the Message Security Settings screen, check the Enable Message Aging check box,
and enter the number of days that encrypted messages should be available. (If the check box is
unchecked, Cisco Unity will not limit the number of days for which encrypted messages will be
available.)
d. Click Next.
e. On the Ready to Install Software screen, click Install.
Step 18 When the setup is complete, click Finish to exit Setup and restart the server.
Step 19 Enable virus-scanning and the Cisco Security Agent services, if applicable.
To view Voice Connector properties in Exchange System Manager, Windows Script Host version 5.6 or
later must be installed on the Exchange server. (Note that if the Exchange server uses an earlier version
of Windows Script Host, the Voice Connector functions properly, but you will not be able to view Voice
Connector properties in Exchange System Manager.)
To Determine Whether the Microsoft Windows 2000 Script Host Should Be Updated
Step 1 On the Exchange server on which the Voice Connector has been installed, browse to Winnt\System32.
Step 2 Right-click the file Wshom.ocx, and click Properties.
Step 3 Click the Vers ion tab.
Step 4 In the Item Name list, click Product Version to view the version in the Value box.
Step 5 If the version is earlier than 5.6, update Windows Script Host so that the Voice Connector properties can
be displayed in Exchange System Manager. (Go to the downloads page of the Microsoft website, and do
a keyword search for Windows Script Host. Follow the installation instructions.)
To Verify the Voice Connector Installation
To verify that the Voice Connector for Exchange 2000 installed properly, verify that the Voice Connector
service is running, and that the Voice Connector mailbox has been created.
Step 1 Open the Services applet on the Exchange server on which the Voice Connector is installed. (On the
Windows Start menu, click Programs > Administrative Tools > Services.)
Step 2 Verify that the Status for the Exchange 2000 Voice Connector (<Server name>) service is Started, and
that the Startup Type is set to Automatic.
Step 3 Exit the Services applet.
Step 4 Open Exchange System Manager on the Exchange server on which the Voice Connector is installed. (On
the Windows Start menu, click Programs > Microsoft Exchange > Exchange System Manager.)
Step 5 In the tree in the left pane, expand the Servers container. If the organization properties at the top of the
tree have been set such that administrative groups are displayed in the tree, the Servers container is
nested within the administrative group container.