Freescale Semiconductor SC140 instruction

DSP Core Instruction Set

Table A-12. AGU Bit-Mask Instructions (BMU)

Instruction	Description


AND	Logical AND on a 16-bit operand

BMCHG	Bit-mask change a 16-bit operand

BMCHG.W	Bit-mask change a 16-bit operand in memory

BMCLR	Bit-mask clear a 16-bit operand

BMCLR.W	Bit-mask clear a 16-bit operand in memory

BMSET	Bit-mask set a 16-bit operand

BMSET.W	Bit-mask set a 16-bit operand in memory

BMTSET	Bit mask test and set a 16-bit operand

BMTSET.W	Bit mask test and set a 16-bit operand in memory

BMTSTC	Bit mask test if clear
	Sets the T-bit, if every bit position that has the value 1 in the mask is 0 in an operand.

BMTSTC.W	Bit mask test if clear in memory
	Sets the T-bit, if every bit position that has the value 1 in the mask is 0 in an operand.

BMTSTS	Bit mask test if set
	Sets the T-bit, if every bit position that has the value 1 in the mask is 1 in an operand.

BMTSTS.W	Bit mask test if set in memory
	Sets the T-bit, if every bit position that has the value 1 in the mask is 1 in an operand.

EOR	Logical Exclusive OR on a 16-bit operand

NOT	Binary inversion of a 16-bit operand

OR	Logical OR on a 16-bit operand

Table A-13. AGU Non-Loop Change-of-Flow Instructions

Instruction	Description


BF	Branch if false
BFD	Branch if false (delayed)

BRA	Branch

BRAD	Branch (delayed)

BSR	Branch to subroutine

BSRD	Branch to subroutine (delayed)

BT	Branch if true

BTD	Branch if true (delayed)

JF	Jump if false

JFD	Jump if false (delayed)

JMP	Jump

JMPD	Jump (delayed)

JSR	Jump to subroutine

JSRD	Jump to subroutine (delayed)

JT	Jump if true

JTD	Jump if true (delayed)

RTE	Return from exception

SC140 DSP Core Reference Manual

A-17

Image 331

Freescale Semiconductor SC140 specifications Table A-12. AGU Bit-Mask Instructions BMU

Contents

Reference Manual SC140 DSP Core SC140 DSP Core Reference Manual Table of Contents SC140 DSP Core Reference Manual Control Registers SC140 DSP Core Reference Manual Program Control Instruction Set Accelerator Plug-In Programming Rules Appendix a SC140 DSP Core Instruction Set Appendix B StarCore Registry Xii List of Figures Xiv List of Tables Xvi SC140 DSP Core Reference Manual Xvii Xviii List of Examples SC140 DSP Core Reference Manual SC140 DSP Core Reference Manual Xxi Xxii About This Book Abbreviations Abbreviations used in this manual are listed belowAbbreviation Description ISR Revision Date Description Revision History Target Markets Chapter Introduction Architectural Differentiation Core Architecture Features Typical System-On-Chip Configuration SC140 platform Variable Length Execution Set Vles Software ModelSoC DSP expansion area System expansion area Core Architecture Features Architecture Overview Chapter Core Architecture Data Arithmetic Logic Unit Dalu Block Diagram of the SC140 Core Bit-Field Unit BFU Address Generation Unit AGUData Register File Multiply-Accumulate MAC Unit Bit Mask Unit BMU Stack Pointer Registers Memory Interface Program Sequencer Unit PseqEnhanced On-Chip Emulator EOnCE Instruction Set Accelerator Plug-in Isap Interface Dalu Architecture Dalu Limit EXT Dalu Programming Model Data Registers D0-D15 Read from Data Registers Write to Data RegistersOperand Type Dn.e Dn.h Dn.l Instruction Description Data Registers Access WidthDalu Arithmetic Instructions MAC Operand Type Data Width Bits DIV NEG Dalu Logical Instructions BFU Data Shifter/Limiter Scaling Example ScalingLimiting Calculating the Ln Bit Limiting with the Moves Instructions Scaling Mode Bits Defining the Ln bit CalculationLn Bit Calculation 10. Scaling and Limiting Interactions Scaling and Arithmetic Saturation Mode InteractionsSelected Special Six Other Dalu Instructions Mode Limiting Example Data Representation Dalu Arithmetic and Rounding11. Saturation and Rounding Interactions Signed Fractional Data Formats 12. Two’s Complement Word Representations Signed IntegerSigned Fractional Signed Integer Unsigned Integer Unsigned Multiplication MultiplicationDivision Unsigned Arithmetic Unsigned Comparison 13. Rounding Position in Relation to Scaling ModeScaling Mode High Portion Low Portion Rounding Modes Convergent Rounding No Scaling 2.6.2 Two’s Complement Rounding Two’s Complement Rounding No Scaling 14. Arithmetic Saturation Example Arithmetic Saturation Mode Fractional Multi-Precision Arithmetic Multi-Precision Arithmetic Support Fractional Double-Precision Multiplication Fractional Mixed-Precision Multiplication Integer Multi-Precision Arithmetic 10. Signed Integer Double-Precision Multiplication 11. Unsigned Integer Double-Precision Multiplication Viterbi Decoding Support AGU Architecture Address Generation Unit Arithmetic AddressUnit AAU Address Generation Unit 13. AGU Programming Model AGU Programming Model Stack Pointer Registers NSP, ESP Address Registers R0-R15 Shadow Stack Pointer Registers Offset Registers N0-N3Base Address Registers B0-B7 Modifier Registers M0-M3 17. Address Modifier AM Bits Modifier Control Register MctlAddress Modifier Modes Register Direct Modes Addressing ModesAddress Register Indirect Modes Address Generation Unit PC Relative Mode Special Addressing Modes Memory Access Misalignment Memory Access Width 20. Addressing Modes Summary Access Type Aligned AddressAddressing Modes Summary 19. Memory Address Alignment PC Relative Address Register IndirectSpecial Address Modifier Modes Linear Addressing ModeReverse-carry Addressing Mode Modulo Addressing Mode 15. Modulo Addressing Example 21. Modulo Register Values for Modulo Addressing Mode Multiple Wrap-Around Modulo Addressing ModeModifier Mj Address Calculation Arithmetic 23. AGU Arithmetic Instructions Arithmetic Instructions on Address Registers Bit Mask Instructions 24. AGU Bit Mask Instructions BMU Bit Mask Test and Set Semaphore Support Instruction Label BMTSET.W #mask,R0 JT label Move InstructionsSemaphore Hardware Implementation Example of Normal Usage of the Semaphoring Mechanism MOVE.W 25. AGU Move Instructions 16. Integer Move Instructions 17. Fractional Move Instructions 18. Bit Allocation in MOVE.L D0.eD1.e Memory Interface 1.1 SC140 Bus Structure 1 SC140 Endian Support 20. Basic Connection between SC140 Core and Memory Memory Organization 26. Data Representation in Memory Data MovesRepresentation Type Value 22. Data Transfer in Big and Little Endian Modes Address Data Multi-Register Moves Multi-Register Transfer in Big and Little Endian Modes Instruction Word Transfers 25. Instruction Moves in Big and Little Endian Modes Memory Access Behavior in Big/Little Endian Modes Example MOVE.2F D0D1, R0 Example MOVE.L D0.ED1.E, A0Example MOVE.2L D0D1, R0 Example MOVE.F D0, R0 Example VSL.2W D1D3, R0 + N0 Example VSL.4W D2D6D1D3, R0 + N0D6 = Example VSL.4F D2D6D1D3, R0 + N0 Data = Example Push D0Example Push D0 Push D1 Example BMSET.W #$1234, A0 Instruction Register Operands Big Little Endian 31. Control Instructions in Big and Little Endian Modes Status Register SR Core Control Registers Describes the various SR bits Name Description SettingsStatus Register Description Exceptions I2-I0 Interrupt Mask Bits Reflect Reserved Overflow Exception Enable BitDisable Interrupts Bit When this bit Exception Mode Bit Selects Rounding Mode Bit Selects the type Equation ModeS1-S0 Scaling Mode Bits Specify Scaling Mode Bit Name Description Settings Arithmetic Saturation Mode Selects Exception and Mode Register EMR Exception and Mode Register EMR EMR Description Describes the EMR fields Illegal Execution Set Indicates whether an Ilst Example 3-1. Clearing an EMR Bit PLL and Clock RegistersClearing EMR Bits Bmclr #$fffb,EMR.L Debugging System Emulation and Debug EOnCE Cascading Multiple SC140 EOnCE Modules in a SoC Jtag Interface Signal DescriptionsSignal Name Signal Description Overview of the Combined Jtag and EOnCE Interface Jtag Instructions Jtag Scan Paths Loadgpr Select-DR Scan Path Select-IR Scan Path TAP Controller State Machine Jtag Scan Paths Enabling the EOnCE Module Activating the EOnCE Through the Jtag Port Reading/Writing EOnCE Registers Through Jtag Debugrequest and Enableeonce Commands Reading and Writing EOnCE Registers Via Jtag EOnCE register read capture operation through Jtag EOnCE register write operation through Jtag Core Interface EOnCE SignalsEOnCE Signals Jtag Signals Main Capabilities of the EOnCE Module Debug State EOnCE Dedicated Instructions Executing an Instruction while in Debug State Debug ExceptionSoftware Downloading Software Downloading EOnCE Event Types EOnCE EventsEvent type Occurs when Event type EOnCE ActionsEvent and Action Summary EOnCE Event and Action Summary EOnCE Module Internal Architecture EOnCE Enabling and Power ConsiderationsEOnCE Controller Address Control Decoder Logic Receive Register Command RegisterTransmit Register Update Signal from the TAP Controller Address Monitor and Control Register Event Counter Event Counter Register Set Shows a block diagram of the event counter Event Detection Unit EDU EventD Event0 Event1 Event2 Event5 Count event EE5..0Address Buses XDBxx Data Buses EEi Address Event Detection Channel Edca Edca Register Set Edcd register set is shown below Data Event Detection Channel EdcdEvent External Event 6,7 Count Event EventD Optional External Event Detection Address Channels Event Selector ES 10. Event Selector Register Set EE40 ES block diagram is shown in FigureTrace Unit Event0..Event5 External Event6, Event7 EventD Count event EOnCE Module Internal Architecture Change of Flow Change of Flow and Interrupt TracingTrace Buffer TB Off-Core Reading the Trace Buffer Tbbuff Writing to the Trace BufferTrace Unit Programming Model 11. Trace Buffer Register Set EOnCE Register Addressing 12. EOnCE Register Addressing Offsets 12 displays the EOnCE register addressing offsetsOffset EDCA4REFA Real-Time Jtag Access Reading or Writing EOnCE Registers Using Core Software Real-Time Data Transfer General EOnCE Register Issues EOnCE Register Addressing 13 describes the ECR fields EOnCE Command Register ECRRead/Write Command Specifies EOnCE Controller Registers EOnCE Status Register ESR 16 displays the bit configuration of the ESR 14. ESR Description 14 describes the ESR fieldsName Description Section DREE3 Name Description Reserved EOnCE Monitor and Control Register Emcr15 describes the Emcr fields 15. Emcr Description Debugerst EOnCE Transmit Register Etrsmt EOnCE Receive Register Ercv Detecting Entry into Debug State EE SignalsEE Signals as Outputs Detection by the Event Detection Channels EE Signals Control Register Eectrl EE Signals as Inputs Eeddef 16. Eectrl Description EE2DEF Length Control Bits Description Core Command Register CorecmdLength control bits are described in -17, below 17. Length Control Bits PC Breakpoint Detection Register Pcdetect PC of the Exception Execution Set PcexcpPC of the Next Execution Set Pcnext PC of Last Execution Set Pclast Event Counter Control Register Ecntctrl Event Counter Registers Reserved for Test Extended Mode of Operation Bit18 describes the Ecntctrl fields 18. Ecntctrl Description Event Counter Value Register Ecntval Event Counter Enable Used toEvents to be Counted Determines Extension Counter Value Register Ecntext EC Signals 19 describes the EDCAiCTRL fields Event Detection Unit EDU Channels and RegistersAddress Event Detection Channel Edca Edca Control Registers EDCAiCTRL Comparators Selection Used to Event Detection Channel EDCAi Comparator B Condition Selection Access Type Selection These bitsComparator a Condition Selection Edca Mask Register EDCAiMASK Edca Reference Value Registers a and B EDCAiREFA, EDCAiREFB 20. Edcdctrl Description Data Event Detection Channel EdcdEdcd Control Register Edcdctrl 20 describes the Edcdctrl fields AWS Access Width Selection Comparator Condition Selection Access Type Selection The ATS bit Edcd Mask Register Edcdmask Event Selector ES RegistersEvent Selector Control Register Eselctrl Edcd Reference Value Register Edcdref 21. Eselctrl Description Eselctrl fields are described in Table Event Selector Mask Debug State Register Eseldm 24 displays the bit configuration of Eseldm Event Selector Mask Debug Exception Register Eseldi Event Selector Mask Enable Trace Register Eseletb Trace Unit Registers Event Selector Mask Disable Trace Register EseldtbTrace Buffer Control Register Tbctrl Upon a trace event, trace the counter value Ecntval This mode is usefull only with the Tcount mode22. Allowed tracing mode combinations Trace mode Trace Buffer Extension Counter Trace Buffer Counter ModeTbctrl fields are described in the following table 23. Tbctrl Description Trace Issue of Execution Sets Enable Trace Loops Mode Enables tracingTrace Buffer Enable Mode Enables Trace Mark Instruction Mode Trace Buffer Write Pointer Register Tbwr Trace Buffer Read Pointer Register TbrdTrace Buffer Register Tbbuff Trace Unit Registers Pipeline Chapter Program Control Illustrates the five instruction pipeline stages Instruction Pipeline Stages Pipeline Stage Description Pipeline ExamplePipeline Stages Overview Instruction Cycle Operation Instruction Dispatch Instruction Pre-Fetch and FetchAddress Generation Execution Instruction GroupingExample 5-1. Four SC140 Instructions in an Execution Set Instruction Grouping Methods Grouping Types Prefix Grouping Serial Grouping Two-Word Prefix Prefix Types Prefix Instructions Conditional ExecutionOne-Word Low Register Prefix For example Prefix Selection Algorithm Assembly Syntax Meaning Low Register Prefix Selection Algorithm Instruction Reordering Within an Execution Set Example 5-5. Set of 2 Two-word Instructions Requiring a NOP Example 5-4. Conditional Vles Having Two Subgroups Instruction Timing Instruction Categories Timing Summary Sequential Instruction Timing Compare Shift Test Dalu Instruction TimingMove Instruction Timing Bit Mask Instruction Timing Change-Of-Flow Instruction Timing Example 5-6. Delayed Change-of-Flow and Its Delay SlotNon-Loop Change-of-Flow Instructions Loop Change-Of-Flow Instructions Direct, PC-Relative, and Conditional COF COF Execution Cycles Delayed COF Example 5-7. Subroutine Call Timing Example 5-7 shows a case when a stall cycle is addedHighest cycle count of instructions grouped with Call Number of Cycles Needed by Change-of-Flow Instructions Memory Access Timing Memory Access Examples Example 5-8. Parallel Execution of Two Move Instructions MOVE.L Memory Stall Conditions Implicit Push/Pop Memory Timing Loop Programming Model Hardware LoopsLoop Start Address Registers SAn Loop Counter Registers LCn Loop Notation and EncodingStatus Register SR Loop Flag Bits Location Functionality Loop Initiation and ExecutionLpmarka and Lpmarkb Bits in Short and Long Loops Loop Type Loop Iteration and Termination Loop Nesting Instruction Operation Loop Control Instructions10 lists the loop instructions 10. Loop Control Instructions Example 5-12. Long Loop Example 5-13. Long Loop DisassemblyExample 5-14. Short Loop, Two Execution Sets Example 5-15. Short Loop, One Execution Set Following is an example of a nested loopExample 5-16. Nested Loop Loop Timing Stack Support1 SC140 Single Stack Memory Use Shows the stack structure 2 SC140 Dual Stack Memory Use Even Register De File Odd Register Do File Stack Support Instructions11. Stack Push/Pop Instructions 12. Even and Odd Registers 14. Stack Move Instructions Addressing Mode DescriptionShadow Stack Pointer Registers 13. Stack Memory Map Fast Return from Subroutines Working Modes Normal Working ModeException Working Mode Working Mode EXP bit Active SP Dual-stack Rtos Typical Working Mode Usage Scenarios Single-stack Rtos Working Mode TransitionsFrom Exception to Normal mode From Normal to Exception mode Working Modes Processing State Change Instructions Processing States16. Processing State Change Instructions Processing State Transitions 10. Core State Diagram Processing State Transitions Description Reset Processing StateExecution State 17. Processing State Transitions Wait Processing State 18. Exit Wait Processing State due to an Interrupt or NMI Stop Processing State Exception Processing 11. Core-PIC Interface SC140 Vector Base Address Register Interrupt Vector AddressProgramming Exception Routine Addresses 19. Exception Vector Address Table Return From Exception InstructionsException Address Priority Type Description Offset Highest Interrupt Priority Level Maskable InterruptsNon-Maskable Interrupts NMI Internal Exceptions Illegal Instruction Illegal ExceptionIllegal Execution Set Debug Exception Exception Interface to the PipelineDalu Overflow Trap Exception Example 5-17. Basic Exception Timing Exception Mode ExecutionException Timing 20. Exception Pipeline Exception Processing 12 provides a flow chart for Example 21. Pipeline Example Introduction Instruction Set Accelerator Plug-In SC140Core Isap SC140 Schematic ConnectionSingle Isap Data Memory Multiple Isap Core to Multiple Isap Connection Schematic Binary Encoding Words Bits Isap Memory AccessIsap instructions and instruction encoding Isap Encoding Fields ISAP-core register transfers Example 6-1. Isap memory accessTo understand this, look at the following lines of code Example 6-3. ISAP-Core register transfers Immediate Data Transfer to Isap registersFollowing line of code Example 6-2. ISAP-Core register transfers Vles that uses an implicit Isap ID string Core Assembly Syntax with an IsapIdentification of Isap instructions Working with One Isap One Isap in a Single-Line Vles Working with Multiple ISAPsOne Isap in a Multi-Line Vles Multiple ISAPs in a Multi-Line Vles An Example of the Definition Flexibility of an IsapExample 6-5. Multiple Isap coding Example 6-7. Conditional Execution Example Example 6-6. Conditional Execution Example Isap Functions that Interact With the Core Programming Rules Rules for implicit AGU instructions Grouping rules for explicit Isap instructions D.2, D.3 Sequencing rules for T bit update Programming Rules Vles Grouping Semantics Vles Sequencing Semantics Vles Grouping Semantics Programming Rule Notation SC140 Pipeline ExposureGrouping Rules Register Read/Write Sequencing Rules Register Aliasing Status Bit UpdatesInstruction Words MOVE-like Instructions Change-Of-Flow Destinations Delayed COF InstructionsDelay Slot AGU Arithmetic Instructions Hardware Loop Detection Enabled LoopStatic Programming Rules Hardware Loops Rule G.G.3 General Grouping RulesRule G.G.1 Rule G.G.2 Example 7-7 Duplicate Stack Pointer Destinations Rule G.G.4Example 7-5 Duplicate PC Destinations Example 7-6 Duplicate Address Pointer Register Destinations Example 7-10 Duplicate Status Bit Destinations Rule G.G.4 ExceptionsExample 7-8 Duplicate Register Destinations Example 7-9 Duplicate SR/EMR Register Destinations Example 7-15. Dalu Register Use Exceeds Four Times Prefix Grouping RulesRule G.G.5 Following rules only apply to prefix-grouped Vles Example 7-16 Vles Extension Words Exceed Two Rule G.P.1Example 7-17 Two-Word Instructions Exceed Two Example 7-18. Vles Has Mutually Exclusive Instructions Rule G.P.3Rule G.P.4 Rule G.P.5 Example 7-21. IFc Having Two Subgroups Rule G.P.6Rule G.P.7 Example 7-20. Data Source Use of Nn and Mn Registers Rule G.P.9 Rule G.P.8Example 7-24. Isap instructions in same IFc group Rule A.1 AGU RulesExample 7-25. Mctl Write to R0-R7 Use Rule A.3 Rule A.2Example 7-26. Rn, Nn, Mn Write to AGU Use Example 7-27. Rn or Nn Write to MOVE-like Use Rule A.4Example 7-28. LCn Write to MOVE-like Use Rule A.7 Delayed COF RulesExample 7-29. Nmid Update to EMR Read Example 7-30. Instructions in a Delay Slot Rule D.3 Example 7-31. Instructions in a Rted Delay SlotExample RTE/D with SR Updates Rule D.2 Rule D.6 Rule D.4Rule D.5 Rule D.5a Rule T.1 Status Bit RulesRule D.8 Rule D.9 Rule SR.2 Rule T.2.aRule T.2.b Rule T.2.c Static Programming Rules Example 7-43. SR Write to SR Status Bit Use Rule SR.3 Example 7-44. SR Write to SR Status Bit UpdateRule SR.4 Example 7-46. Dovf Update grouped with Move-like SR updates Example 7-45. Dovf Update to SR Read or WriteRule SR.4a DI and EI DOENn and DOENSHn Loop Nesting RulesRule SR.7 Rule L.N.1 Example 7-50. Nested DOENn/DOENSHn Instructions Rule L.N.2Rule L.N.3 Example 7-49. Nested Loops with Ordered Index Example 7-53. Changing a loop type Example 7-52. Loopend between Doen and Loopend Example 7-54. Instructions at the End of Long Loops Loop LA RulesRule L.L.1 Rule L.L.2 Example 7-56. Instructions in Short Loops Rule L.L.3Rule L.L.4 LA of a short loop cannot be at LA-1 of a long loop Rule L.D.1 Loop Sequencing RulesRule L.L.5 Rule L.L.6 Example 7-60. LCn Write at the Start of Short Loop n Rule L.D.3Rule L.D.5 Rule L.D.6 Rule L.D.8 Rule L.D.7Rule L.D.9 Rule L.C.3 Loop COF RulesRule L.C.1 Rule L.C.2 Bc or Jc instruction is not allowed at LA-3 of a long loop Rule L.C.5Example 7-68. Bc/Jc at LA-3 of a Long Loop Example 7-69. Loop COF Destination in the Same Loop Rule L.C.7 Example 7-71. Subroutine Call to End of Loops Rule L.C.9Rule L.C.10 Example 7-70. Loop COF at End of Nested Long Loops Rule L.G.3 General Looping RulesRule L.C.11 Rule L.C.12 Rule A.2a Dynamic Programming RulesAGU Dynamic Rules Rule L.G.5 Rule D.7 Memory Access RulesRule A.5 Rule A.6 Rule L.N.6 RAS RulesLoop Rules Rule J.4 Example 7-82. SR.2 Across a COF Boundary Example 7-83. A.2 from a Delay Slot to a COF DestinationRule Detection Across COF Boundaries Cycle-Based COF Rules VLES-Based COF Rules Rule SR.4b Example 7-85. EMR access at the start of an exceptionRule Detection Across Exception Boundaries Rule SR.2a Example 7-86. Mctl Write to R0-R7 Use Rule A.1a Rule J.2 COF destination cannot be a delay slotProgramming Guidelines Rule J.1 Rule J.5 Rules Not Detected Across COF BoundariesGood Programming Practices Source Code Practices Binary Code Practices Lpmark Instruction Type Lpmark RulesSoftware Development Practices Prefix Grouping Rules Static Programming RulesDynamic Programming Rules General Grouping Rules Loop LA Rules Loop Nesting Rules Example 7-93. Active LCn Write at the End of Long Loops Lpmark Rule L.L.2Lpmark Rule L.L.3 Lpmark Rule L.L.5 Lpmark Rule L.D.6 Loop Sequencing RulesLpmark Rule L.L.6 Lpmark Rule L.D.2 + L.D.3 Example 7-97. Active LCn Read at the Start of a Loop Loop COF RulesLpmark Rule L.C.2 COF instructions are not allowed at LPB of a long loop Example 7-98. COF Instructions at LPB of a Long Loop Lpmark Rule L.C.3 + L.C.5Example 7-99. Bc/Jc at the Start of a Loop Example 7-101. Subroutine Call to End of Loops Lpmark Rule L.C.9Lpmark Rule L.C.10 Example 7-100. Loop COF at End of Nested Long Loops General Looping Rules Lpmark Programming GuidelinesRule Detection Across Exception Boundaries NOP Definition Example 7-104. COF Destination to Loop Delay SlotsLpmark Rule L.C.1 Is encoded as Grouping Examples Is assembler mapped to the IFF prefix and encoded as Is assembler mapped to the IFT prefix and encoded as Is encoded ignoring the NOP subgroup as NOP Definition Appendix a SC140 DSP Core Instruction Set Table A-1. Instruction Conventions ConventionsConvention Definition Abbreviation Register Name Table A-2. Operations SyntaxTable A-3. Register Abbreviations Operator Description Brackets as address indicators Brackets as Isap indicatorsTable A-4. Assembler Syntax Addressing Mode Definition Notation in Instruction Field Addressing Mode NotationTable A-5. Addressing Mode Notation for the EA Operand Table A-6. Addressing Mode Notation for the ea Operand Encoding Notation Data Representation in Memory for the ExamplesDefinition for the field is Prefix Word Encoding Ccc Instruction Formats and OpcodesInstruction Fields Aaa Prefix Words Cycles Type Example, 2-w prefix + 2 grouped instruction words, aaa =If true D0, D2, A0, if false D1, D3, A1 If true, all the set High data register is used for the op1 field E2 is set Last, or to last-1 ExampleFirst execution set of the loop High data register is used for the op3 field E3 is set DSP Core Instruction Set Instruction Sub-types Instruction Types Table A-7. Dalu Arithmetic Instructions MAC Table A-8. Dalu Logical Instructions BFU Table A-9. AGU Arithmetic Instructions Table A-11. AGU Stack Support Instructions Table A-10. AGU Move Instructions Table A-13. AGU Non-Loop Change-of-Flow Instructions Table A-12. AGU Bit-Mask Instructions BMU Table A-16. Prefix Instructions Table A-15. AGU Program Control Instructions Instructions InstInstruction Definition Layout ABS Instruction Single Source/Destination Data Register ADC Dc,Dd ADCAdd Long With Carry Dalu Dc + Dd + C → Dd Register/Memory Address Before Dc,Dd Data Register Pairs Add d0,d1,d2 ADDAdd Dalu Operation Assembler Syntax Add d1,d0,d2 Da,Da Data Register Pairs Da,Db#u5 Add Two 16-Bit Values Dalu ADD2Add2 d0,d1 Single Source Data Register JJJ Adda #s16,rx,Rn AddaAdd AGU Adda #u5,Rx Address Register Adda r0,r1 AGU Source/Destination Register Rrrr AGU Source Register#s16 Rx1 + Rx → Rx ADDL1A Add With One-Bit Arithmetic Shift Left ADDL1ASource Operand AGU Addl1a r0,r1 ADDL1A rx,Rx ADDL2A rx,Rx ADDL2A Add With Two-Bit Arithmetic Shift Left ADDL2AAddl2a r0,r1 Rx2 + Rx → Rx ADDL2A rx,Rx Addnc.w #$ca3e,d1,d2 ADDNC.WAdd Without Changing ADDNC.W Carry Bit Dalu Instruction Words Cycles Type RndDa + Dn → Dn ADRAdd and Round Dalu Adr d3,d4 ADR Da,Dn Da,Dn Bitwise and Dalu#0u16,Da,Dn #u16$0000,Da,Dn #$0ff2e,d2,d1 D2,d1#$ff2e0000,d2,d1 #u16$0000 #0u16#u16 #u16,DR.L #$a70e,d1.h#u16 DR.L → DR.L #u16 DR.H → DR.H Cycles Type Opcode Data/Address Register AND.W #u16,SP+s16 AND.W #u16,RnAND.W #u16,SP-u5 AND.W #u16,a16 And.w #$54a1,r7 S16 A16 ASL Da,Dn ASLAsl d0,d1 Da 1→ Dn ASL Da,Dn ASL2A Rx ASL2AAsl2a r0 Rx2 → Rx Asla Rx AslaAsla r0 Rx1 → Rx Asll Da,Dn AsllMultiple-Bit Arithmetic Shift Left Dalu Asll #u5,Dn Asll d0,d1 Asll Da16 → Dn AslwWord Arithmetic Shift Left 16 Bits Dalu Aslw Aslw d0,d1 Aslw Da,Dn ASR Da,Dn ASRAsr d5,d3 Da1 → Dn Register/Memory Address Before After Asra r2 AsraAsra Rx Multiple-Bit Arithmetic Shift Right Dalu Asrr Asrr d3,d5 Asrr #$3,d5 #u5 Asrw Da,Dn Asrw d5,d0 Asrw Da,Dn BF label If T==0, then PC + displacement → PCBranch If False AGU BF lbl Instruction Words Cycles1 Type Opcode Displacement label BFD label BFD Branch If False Using a Delay Slot AGU OperationBFD BFD lbl Label Displacement ~DR.Hi → DR.Hi Bmchg~C1.Hi → C1.Hi i denotes bits=1 in #u16 ~C1.Li → C1.Li Clears the Ln bit in the destination data register Bmchg #$f0f0,d1.hControl Registers Iiiiiiiiiiiiiiii 16-bit unsigned immediate data Bit-Masked Change a BMCHG.W BMCHG.W #u16,SP-u5 Bmchg.w #$661f,$800c Bit signed SP address offset Bmclr #u16,DR.H Bmclr Bit-Masked Clear a 16-Bit Operand BMU Bmclr OperationBmclr #u16,C1.H Bmclr #u16,C1.L Bmclr #$b646,d7.l #u16 Bit-Masked Clear a BMCLR.WBit Operand in Memory BMU Operation Assembler Syntax BMCLR.W #u16,SP-u5 Bmset #u16,DR.L Bmset #u16,C1.HBmset #u16,C1.L Bmset #u16,DR.H Bmset #$2436,d1.l Bit Operand in Memory BMU BMSET.W Register/Memory Address Before Immediate Bmset.w #$f111,$800c$800C Bmtset #u16,DR.L BmtsetBmtset #$111f,d1.l Bmtset #u16,DR.H Bmtset #$4238,d4.l Bit-Masked Test and Set a BMTSET.W BMTSET.W Bmtset.w #$4328,$c BMTSET.W #u16,SP-u5 Bmtstc #$8a59,d7.h Bmtstc $0$0024A60000 $00E40000 BMTSTC.W #u16,Rn BMTSTC.WBMTSTC.W #u16,SP-u5 BMTSTC.W #u16,SP+s16 Bmtstc.w #$8A59,r0 BMTSTC.W #u16,SP-u5 Bmtsts #u16,DR.L BmtstsBmtsts #u16,C1.L Bmtsts #u16,DR.H Bmtsts #$24a6,d7.h BMTSTS.W #u16,Rn BMTSTS.WBMTSTS.W #u16,SP-u5 BMTSTS.W #u16,SP+s16 Bmtsts.w #$0428,r0 BMTSTS.W #u16,SP-u5 BRA label PC + displacement → PCBRA Branch AGU AAAAAAAAAA0 Brad label BradSource Code Comments $0000 000A $0000 000E → LFn PC + displacement → PCBreak Break label Encoding is the displacement with bit Bsr label BSRBranch to Subroutine AGU Status and Conditions Changed by Instruction None Example BSR Next* PC → SP SR → SP + 4 SP + 8 → SP PC + displacement → PC, next* PC→RASBsrd label Bsrd label BT label If T==1, then PC + displacement → PCBranch If True AGU BT lbl Register/Memory Address Before BT After BTD label BTD Branch If True Using a Delay Slot AGU OperationBTD BTD lbl $0035 $0000 $0006 $002A $001A $0016 CLB Da,Dn CLBCount Leading Bits Dalu Clb d3,d7 CLB Da,Dn → Dn CLRClear a Data Register Dalu Clr d1 Source Data Register Destination Data Register If Da == Dn, then 1→ T, else 0 → T CmpeqCompare for Equal Dalu Cmpeq d2,d3 118 CMPEQ.W #u5,Dn CMPEQ.WCMPEQ.W Compare for Equal Dalu Cmpeq.w #$5,d3 CMPEQ.W Cmpeqa rx,Rx Cmpeqa Compare for Equal AGU Cmpeqa OperationCmpeqa r1,r2 If rx == Rx, then 1 → T, else 0 → T Cmpeqa rx,Rx Dn Da → T CmpgtCompare for Greater Than Dalu Cmpgt d2,d3 124 CMPGT.W #s16,Dn CMPGT.WCmpgt.w #$8002,d2 CMPGT.W #u5,Dn CMPGT.W #u5,Dn Rx rx → T CmpgtaCompare for Greater Than AGU Cmpgta Cmpgta r2,r3 Cmpgta rx,Rx Cmphi Da,Dn CmphiUnsigned Compare for Higher Dalu Cmphi Cmphi d1,d0 130 Cmphia rx,Rx CmphiaUnsigned Compare for Higher AGU Cmphia Cmphia r0,r1 Cmphia rx,Rx Label ContContinue to the Next Loop Iteration AGU Label Cycles1 Type Opcode Contd label Contd Cycles1 Type Debug Enter Debug Mode AGUDebug Debugev Signal a Debug Event AGU Debugev Rx 1 → Rx DecaDecrement a Register AGU Deca r0 Bit unsigned immediate data = 1, set by the assembler Dn 1 → Dn if Dn==0, then 1→ T, else 0 → T Deceq d7Deceq Dn 142 Deceqa Rx Deceqa Decrement and Set T If Equal Zero DeceqaDeceqa r0 Rx 1 → Rx if Rx==0, then 1 → T, else 0 → T Deceqa Rx Decge Dn DecgeExample decge Dn 1 → Dn Dn≥0 → T SC140 DSP Core Reference Manual 145 Decgea Rx DecgeaDecgea r4 Rx 1 → Rx Rx ≥ 0 → T Decgea Rx SR18 Determines execution working modeSR19 Set disable interrupt bit → DIPage Then 2 * Dn + C + Da & $FF Ffff 0000 → Dn DIVDivide Iteration Dalu If Dn39 ⊕ Da39 = Div d2,d1 DIV Da,Dn Dc signed, Dd signed DmacssDmacss d2,d3,d5 Dn16 + Dc.H * Dd.H → Dn Dmacss Dc,Dd,Dn 1 1 Accumulate With Right Shifted Data Register Dalu Dmacsu Multiply Signed By Unsigned and DmacsuDmacsu d2,d3,d5 156 DOENn #u16 Do Enable Long Loop AGUDoen2 d0 DOENn #u6 #u6 Loop Identifier DOENSHn #u16 Do Enable Short Loop AGU DOENSHnDoensh2 d0 DOENSHn #u6 $00E4 $A0E4 DOSETUPn label Setup Long Loop DOSETUPnDosetup1 label PC + displacement → SAn Encoding is the displacement with → DI SR19 Clears disable interrupt bit 164 Da ⊕ Dn → Dn EORBitwise Exclusive or Dalu Eor d4,d5 EOR Da,Dn EOR #u16,DR.L Eor #$5,d5.lEOR #u16,DR.H EOR #u16,DR.L EOR #u16,DR.H Bitwise Exclusive or on EOR.W Eor.w #$aaaa,r0 Extract #U6,#u6,Db,Dn ExtractExtract Extract Signed Bit Field Dalu Extract #$c,#$e,d2,d4 Jjj Single Source/Destination Data Register Extractu #U6,#u6,Db,Dn ExtractuExtractu Extract Unsigned Bit Field Extractu #$c,#$e,d2,d4 Extractu #U6,#u6,Da,Dn IADDNC.W #s16,Dn Iaddnc.w #$a002,d2 Else treat as NOP Execute group/subgroup unconditionally Conditionally Execute a Group or Subgroup Prefix IFcIf T == Then execute group/subgroup Else treat as NOP If T == Then execute group/subgroup Ccc Conditional execution of the entire execution set Ift move.w #$ffff,d0 Illegal Illegal Imac ±Da,Db,Dn ImacImac d4,d5,d6 Dn ± Da.L * Db.L → Dn Accumulation Notation Imac -d4,d5,d6 182 Imaclhuu Da,Db,Dn Dn + Da.L * Db.H → Dn Imaclhuu Da,Db,Dn Imacus d3,d4,d0 ImacusInteger Multiply Accumulate Unsigned By Signed Dalu Operation Assembler Syntax $0002 x -64 $FFC0 -128 $FF80 +0 $0000 -128 $FF80 Impy Da,Db,Dn ImpyInteger Multiply Dalu Da.L * Db.L → Dn D1,D1 D3,D3 D5,D5 D7,D7 #s16 * Dn.L → Dn Impy.w #$fffe,d3IMPY.W #s16,Dn +16 Da.H * Db.L → Dn ImpyhluuInteger Multiply Upper Impyhluu Impyhluu d4,d3,d0 Impyhluu Da,Db,Dn Register Bit Name Description Address ImpysuImpysu d3,d5,d1 Impysu Da,Db,Dn Impysu Da,Db,Dn Impyuu d5,d3,d1 ImpyuuImpyuu Da,Db,Dn 196 INC Dn INCINC Increment a Data Register By One Dalu Operation Inc d0 Inc d15 Dn + $0000010000 → Dn Inc.f d15INC.F Dn INC.F Dn Rx + 1 → Rx IncaIncrement Register AGU Inca r0 Inca Rx Insert #U6,#u6,Db,Dn InsertInsert Bit Field Dalu Insert #12,#22,d6,d7 Insert #U6,#u6,Db,Dn JF Rn Jump If False AGUJF lbl JF label Bit absolute long address JFD label JFDJFD Rn $00E0 $00 0000 $0000 $00 0000 002A $00 0000 001A JMP label JMPJump AGU Jmp label JMP label Jmpd label Jump Using a Delay Slot AGUJmpd Example jmpd lbl AaaaaaaaaaaaaaaaAAAAAAAAAAAAAAAAA JSR label JSRJump to Subroutine AGU Jsr r6 Absolute long address Jsrd Rn Example jsrd r6Next* PC → RAS Rn → PC Jsrd label Jsrd label JT Rn Jump If True AGUJt r0 JT label JT label JTD label Jump If True Using Delay Slot AGUJTD Example jtd r0 JTD label LCn 1 → LCn Else next PC → PC → LFn → SLF LPMARKx End-of-Loop Mark Prefix LPMARKx OperationIf LCn Then SAn → PC LCn 1 → LCn Else next PC → PC → LFn If LCn Then SAn → PC LCn Description Status and Conditions that Affect Lpmark ExecutionTable A-17. Combinations of LPMARKx Use LFn Instruction Disassembled Instruction Comments Status and Conditions Changed by Lpmark ExecutionPrefix Formats and Opcodes Insertion of lpmarkb by assembler Lsll Da,Dn LsllMultiple-Bit Bitwise Shift Left Dalu Lsll d4,d2 $00E4 $0$FF 8765 Dn1 → Dn 0 → Dn39 LSRBitwise Shift Right One Bit Dalu Lsr d4 Rx1 → Rx 0 → Rx31 LsraBitwise Shift Right By One Bit AGU Lsra r2 Lsrr #u5,Dn LsrrMultiple-Bit Bitwise Shift Right Dalu Lsrr Da,Dn Before After Lsrr d4,d2 Bit unsigned immediate data Lsrw Da,Dn LsrwWord Bitwise Shift Right Dalu Lsrw d4,d2 Lsrw Da,Dn MAC #s16,Da,Dn MACSigned Fractional Multiply-Accumulate Dalu Mac d4,d5,d6 Mac #$1000,d5,d6 SC140 DSP Core Reference Manual 235 Macr ±Da,Db,Dn MacrMacr d4,d5,d6 RndDn ± Da.H * Db.H → Dn 000 0000 0000 1000 $0008 Instruction Formats and Opcodes 238 Macsu Dc,Dd,Dn MacsuMacsu d0,d1,d4 Dn + Dc.H * Dd.L → Dn 111 1111 1111 1111 $FFFF Instruction Formats and Opcodes Dn + Dc.L * Dd.H → Dn MacusMacus Dc,Dd,Dn Macus Dc,Dd,Dn Macuu d2,d3,d1 MacuuFractional Multiply-Accumulate Unsigned By Unsigned Dalu Operation Assembler Syntax Macuu Dc,Dd,Dn Push the PC into the Trace Buffer AGU Mark MarkPC → trace buffer If Dg Dh, then Dg → Dh MAXTransfer Maximum Signed Value Dalu Max d0,d4 If Dg.L Dh.L, then Dg.L → Dh.L MAX2Max2 d0,d4 If Dg.H Dh.H, then Dg.H → Dh.H 00 D0,D4 01 D1,D5 10 D2,D6 11 D3,D7 248 MAX2VIT Da,Db MAX2VITIf Da.L Db.L, then 0 → VFn, Da.L → Db.L Else 1 → VFn Max2vit d4,d2 Maxm d2,d6 Maxm Transfer Maximum Absolute Value Dalu Maxm OperationMaxm Dg,Dh 00 D0,D4 01 D1,D5 10 D2,D6 11 D3,D7 252 MIN Dg,Dh MINTransfer Minimum Signed Value Dalu Min d1,d5 Description MOVE.2FMove Two Fractional Words from MOVE.2F Memory to a Register Pair AGU MOVE.2F EA,DaDb DaDb Data Register Pairs MOVE.2L DaDb,EA MOVE.2L EA,DaDb MOVE.2LMove.2l d0d1,r0 Da,Db ↔ EA Read/Write Notation MOVE.2W EA,DaDb MOVE.2W DaDb,EA MOVE.2WMove.2w d0d1,r0 EA ↔ DaDb $FF Ffff AF44 EA → DaDbDcDd MOVE.4FMove Four Fractional Words from MOVE.4F Memory to a Register Quad AGU DaDbDcDd Data Register Quad Move.4f r0,d0d1d2d3 EA ↔ DaDbDcDd MOVE.4WMOVE.4W EA,DaDbDcDd MOVE.4W DaDbDcDd,EA Move.4w d0d1d2d3,r0 Byte Move AGU MOVE.B MOVE.B DR,SP+s15 Move.b d3,r7+$3MOVE.B DR,ea MOVE.B SP+s15,DR MOVE.B a16,DR S15 A32 Move Fractional Word MOVE.FTo/from Memory AGU Operation Assembler Syntax MOVE.F SP+s15,Db Move.f $54,d10MOVE.F Db,ea MOVE.F #s16,Db MOVE.F a16,Db SC140 DSP Core Reference Manual 271 Move Long Word AGU MOVE.L General Registers Cccc #u32 #s32 MOVE.L Da.EDb.E,SP+s15 MOVE.L SP+s15,De.E MOVE.L Da.EDb.E,a32 Move.l d0.ed1.e,$1224MOVE.L SP+s15,Do.E MOVE.L a32,De.E Da.EDb.E ff Data Register Extension Pair Data Register 278 Move Long AGU MOVE.L Rn+s15,DR MOVE.L DR,Rn+s15 MOVE.L a32,DR MOVE.L DR,a32MOVE.L a16,C4 MOVE.L C4,a16 MOVE.L Rn+u3,DR MOVE.L DR,Rn+u3 MOVE.L SP+s15,C4 MOVE.L C4,SP+s15 Move.l d0,r0 MOVE.L EA,DR MOVE.L DR,EA Read/Write Notation Rrr Address Register Unsigned 3-bit offset MOVE.W #s16,SP-u5 MOVE.W #s7,DRMOVE.W #s16,C4 MOVE.W #s16,a16 Move.w #$0050,r7 MOVE.W #s7,DR MOVE.W #s16,C4 Sa16 #s7 MOVE.W a16,C4 MOVE.W C4,a16 MOVE.WMove Integer Word AGU MOVE.W a32,DR MOVE.W DR,a32 MOVE.W Rn,C3 MOVE.W C3,Rn MOVE.W Rn+u3,DR MOVE.W DR,Rn+u3MOVE.W Rn+s15,DR MOVE.W DR,Rn+s15 MOVE.W Rn+Rr,DR MOVE.W DR,Rn+Rr Move.w d1,r7+4 MOVE.W a32,DR MOVE.W DR,a32 Write Sss0 Movef Rq,Rn MOVEc Conditional Address Register Move AGU MOVEc OperationMovet r0,r1 Movet Rq,Rn Qqq Address Register DaDb → EA MOVES.2F Move Two Fractional Words to MOVES.2FMOVES.2F DaDb,EA $7FFF $7EAC DaDbDcDd → EA Moves.4f d0d1d2d3,r0MOVES.4F DaDbDcDd,EA $7FFF Move Fractional Word to MOVES.F Moves.f d0,r0 MOVES.F Db,a16 304 Moves.l d0,r0 MOVES.LMove Long to Memory With Scaling and Saturation AGU Operation MOVES.L Db,EA Move Unsigned Byte from MOVEU.BMemory AGU Operation Assembler Syntax Moveu.b $0053,d10 MOVEU.B a16,DR 310 MOVEU.L #u32,Db MOVEU.LMoveu.l #$fffffff8,d3 #u32 → Db 31IIIIIIIIIIIIIIII16 MOVEU.W #u16,Db.H Moveu.w #$2345,d10.l#u16 → Db3116 #u16 → Db150 Iiiiiiiiiiiiiiii Bit unsigned immediate data #u16 Move Unsigned Word from MOVEU.WMemory to a Register AGU Operation Moveu.w r7+2,d10 MOVEU.W a16,C4 318 MPY Da,Db,Dn MPYMpy d4,d5,d6 Da.H * Db.H → Dn Mpy d6,d6,d7 SC140 DSP Core Reference Manual 321 Mpyr Da,Db,Dn MpyrMpyr d4,d5,d6 RndDa.H * Db.H → Dn Register/Memory Address Before After L6D6 $0000 324 Mpysu Dc,Dd,Dn MpysuMpysu d4,d5,d6 Dc.H * Dd.L → Dn 326 Dc.L * Dd.H → Dn MpyusMpyus Dc,Dd,Dn 328 Mpyuu Dc,Dd,Dn MpyuuMpyuu d4,d5,d6 Dc.L * Dd.L → Dn 330 NEG Dn NEGNegate Dalu Neg d3 NEG Dn Nop NOPNo Operation Prefix No operation ~Da → Dn NotBitwise Complement Dalu Not d4,d5 SC140 DSP Core Reference Manual 335 Not D0.L Binary Inversion of a 16-Bit Operand BMU~DR.L → DR.L Not DR.L Binary Inversion of a 16-Bit Operand NOT.WMemory BMU Operation Assembler Syntax Not.w r1 Or Da,Dn Bitwise Inclusive or DaluExample or d3,d0 Da Dn → Dn SC140 DSP Core Reference Manual 341 Or #u16,DR.L Or #$0f0a,d0.l#u16 DR.L → DR.L #u16 DR.H → DR.H Or #u16,DR.L Or #u16,DR.H OR.W #u16,a16 OR.W #u16,RnOR.W #u16,SP-u5 OR.W #u16,SP+s16 OR.W #u16,Rn Or.w #$f01a,r1 346 POP Do SP 8 → De SP 8 → SPSP 4 → Do SP 8 → SP POP De Pop d3 Extension Pairs, Even Registers, and Loop Start Registers Eeeee NSP 4 → Do NSP 8 → ΝSP NSP 8 → De NSP 8 → ΝSP Popn De Popn d6.ed7.ePopn Do 352 Push Do De → SP SP + 8 → SPDo → SP + 4 SP + 8 → SP Push De Push d0.ed1.e SC140 DSP Core Reference Manual 355 Pushn Do De → NSP NSP + 8 → ΝSPDo → NSP + 4 NSP + 8 → ΝSP Pushn De Pushn d0.ed1.e Pushn De Pushn Do RND Da,Dn RNDRound Dalu RndDa → Dn Rnd d2,d1 Rnd d1,d5 RND Da,Dn ROL Dn Rol d5Dn3801 → Dn391 Dn39 → C → Dn0 ROL Dn ROR Dn Ror d15Dn39-11 → Dn38-0 → Dn39 Dn0 → C ROR Dn SP 8 → PC RTESP 4 → SR SP 8 → SP → Nmid Instruction Words Cycles1 Type Rte Rted Trap Example rted If RAS valid, then RAS → PC RTSReturn From Subroutine AGU Rts RTS Rtsd Rtsd Rtsd Register Address Bit Name Description EMR3 Restore PC from Stack AGURtstk Cleared Example rtstk SP 8 → PC RtstkdSP 8 → SP Example rtstkd SAT.F Da,Dn SAT.FSat.f d2,d3 If Da $007FFFFFFF then $007FFF0000 → Dn SAT.F Da,Dn Sat.l d6 SAT.LSAT.L Dn SC140 DSP Core Reference Manual 381 SBC Dc,Dd SBCSubtract With Borrow Dalu Db Dc C → Dd SBC Dc,Dd RndDn Da → Dn SBRSubtract And Round Dalu Sbr d3,d0 0010 1010 1110 0111 0000 0000 1000$2AE7 Skipls label If LCn ≤ Then PC + displacement → PC Skipls label → LFnSkipls Skipls label Skipls label Stop Stop Instruction Processing AGU Operation StopEnter the stop processing state SUB #u5,Dn SUBSubtract Dalu Sub d1,d0,d2 Sub d0,d1,d2 SC140 DSP Core Reference Manual 391 Subtract Two 16-Bit Values Dalu SUB2Sub2 d0,d1 SUB2 Da,Dn Suba #u5,Rx SubaSubtract AGU Suba r1,r0 Suba Dn Da → Dn SublShift Left and Subtract Dalu Subl d0,d1 $0$FF Ffff Fffe SUBNC.W #s16,Dn SUBNC.WSubnc.w #$15,d0 Dn #s16 → Dn SUBNC.W #s16,Dn Sxt.b d3,d0 Sign-Extension DaluSxt.w d3,d2 Sxt.l d3 Sxta.b r3,r1 Sign-Extension AGUSxta.w r3 SXTA.B Tfr d7,d6 TFRTransfer Data Register to Data Register Dalu Tfr d15,d14 TFR Da,Dn Tfra rx,Rx TfraTfra r0,r1 Rx → Rx SC140 DSP Core Reference Manual 407 Else Rn → ESP To/from a Register AGUIf Srexp = Then NSP → Rn Else ESP → Rn If Srexp = Then Rn → NSP Tfra r0,osp Tfrt Da, Dn Tfrt d14,d15If T=1, then Da → Dn If T=0, then Da → Dn Tfrt TRAPn Trap Execute a Software Exception AGU Trap Operation Trap If Dn == 0, then 1 → T, else 0 → T TsteqTest for Equal to Zero Dalu Tsteq d1 TSTEQA.W Rx TSTEQA.x Test for Equal to Zero AGU TSTEQA.x OperationTsteqa.w r4 Tsteqa.l r1 TSTEQA.W TSTEQA.L If Dn = 0, then 1 → T, else 0 → T TstgeTest for Greater Than Or Equal to Zero Dalu Tstge d4 If Rx ≥ 0, then 1 → T, else 0 → T Tstgea.l r7TESTGEA.L Rx TSTGEA.L Rx Tstgt Dn Tstgt Test for Greater Than Zero Dalu Tstgt OperationTstgt d6 If Dn 0, then 1 → T, else 0 → Τ Tstgta Rx Tstgta Test for Greater Than Zero AGU Tstgta OperationTstgta r2 If Rx 0, then 1 → T, else 0 → Τ Viterbi Shift Left Move AGU Word Big Endian ModeLittle Endian Mode VSL VSL.2F D1D3,Rn+N0 VSL.4W D2D6D1D3,Rn+N0VSL.4F D2D6D1D3,Rn+N0 VSL.2W D1D3,Rn+N0 After Little Endian Vsl.2w d1d3,r0+n0After Big Endian VSL.4W Response Enters the low-power standby Wait processingWait State Wait Zxt.b d2,d5 Zero Extension DaluZxt.w d3,d6 Zxt.l d0 Zxta.b r3,n2 Zero Extension AGUZxta.w r4 ZXTA.B ZXTA.x 432 Appendix B StarCore Registry Using the StarCore Registry Hex Bits Instruction Cores Example Table B-1. Scid AssignmentsSet Version SoC / platform Index Ecnten Eeddef Eselctrl 4-26ESELDI 4-26ESELDM 4-26ESELDTB 4-26 Eseletb MOVES.F A-299 MOVES.L A-301 MOVEU.B A-307 Macsu A-239 Macus A-241 Macuu A-243 Mpysu A-325 Mpyus A-327 Mpyuu A-329 Rtstk A-374 Index Index SC140 DSP Core Reference Manual