Hitachi S-4800 2.3.6.13Arrangement of control blocks

2.3.6.13Arrangement of control blocks

Above controls are placed on SEM and UTILITY tabs by user arrangement.

Open the Operation Panel tab of the Optional setup dialog window by selecting Option menu – Optional Setup – Op.Panel Setting.

It is recommended to place frequently used controls on the SEM tab, and others to Utility tab. If you do not use some controls, remove them from both two tabs.

The names of control blocks are shown on the central column. Simple description of the function and the view of the block is shown when you click one of the block name. When you wish to place the block on the SEM tab, check the box under SEM tab. To place on the Utility tab, check the box under Utility tab.

Uncheck both boxes for unnecessary blocks.

Because the tab space is limited, required space for specified arrangement is calculated and if it is over available space, the following messages will be shown. In this case, close the message by OK button and change arrangement.

[Move a block on the SEM tab to Utility tab.] or [Move a block on the Utility tab to SEM tab.]

The OK button applies specified arrangement.

2 - 41