Hitachi S-4800 manual Record tab, 1Auto Data Display, 5Embed into Image checkbox, 1Memory Photo

2.3.8.3 Record tab

(1) AUTO DATA DISPLAY block

(1-1)Auto Data Display

Auto data display is engaged when this box is checked. (1-2) Magnification to Time and Signal Name checkboxes

These items are include in data display if checked. (1-3) Data Number input box

Input data number into this box. Up to ten characters may be keyed in. Do not use "," (comma) and " " (space).

If the Auto Increment check box is checked and the Data Number has “-nn” at its end (n : numerals, for example “Hitachi-00” ), Data Number is incremented with each successive photographing.

(1-4) Back Ground Image checkbox

When this box is checked, the data display is overlaid on the scanning image. If it is not checked, the background of the data display area is black.

(1-5)Embed into Image checkbox

When this box is checked, the auto data display is embedded into the image data when the image is saved to disk. If it is not checked, only the image data

is saved. This Setting is also applied for Print, Copy and PCI Transfer commands.

If the For Photograph is checked, the position of the auto data display in the saved image is shifted slightly upward to ensure that it is properly framed in photographs. It is recommended not to check the box if the saved image data will be used on the computer only.

(2) PHOTO SPEED block

(2-1) Direct Photo

Selects a scanning speed for direct photo recording. The number of lines for the selected scanning speed is shown under the box.

(2-1)Memory Photo

Selects number of scanning lines for memory photo recording. Normal:

For 640×480 pixels image data

→960 lines (16/19 s photographing time) For 1280×960 pixels image data

→960 lines (16/19 s photographing time) For 2560×1920 pixels image data

→1920 lines (32/38 s photographing time) Enhance:

2 - 48