3.5.7.8 Stage mouse operation on the scanning image
The mouse operation tools on the scanning image, for image adjustment (focus, stigma, contrast) and for stage operation, alternates by clicking the S button of the mouse.
The following tools are shown for stage operation.
(1) X, Y continuous driving |
|
Move the mouse pointer to the circle at the center. It changes to XY mark | . |
Press the left button down and move the mouse to the direction you wish to move image. Stage moves to the mouse drag direction while holding down the button. When you drag the mouse far from the center, the stage moves faster. The speed also linked with magnification so as to keep image moving speed constant.
The direction and speed can be changed while pressing down the button.
(2) Dragging image
At the outside of tools, where the mouse pointer is MOVE mark 
, place the mouse cursor at a start point on the scanning image. Move the mouse to an end point holding down the left button (a red line is drawn), and release it. The stage is then driven so that the image at the start point moves to the end point.
3 - 49
