Hitachi S-4800 manual Save Image Dialog Window, Opt Signal Processing Dialog Window

2.3.17Save Image Dialog Window

The Save Image dialog window is used for saving scanning images or captured images.

To save scanning images, Use the Direct save button on the Control panel. Use the save button on the captured image window to save captured images.

Refer to <3.6 Saving and Recording Images>

2.3.18Opt Signal Processing Dialog Window

The Opt Signal Processing dialog window is used to apply analog processing to signals of optional detector signal.

Refer to <3.9.5 Signal Processung>

2.3.19Split/Dual Mag Controller

Split Screen mode displays two images in the viewing area, and allows images to be displayed having different signals and at different magnifications. The Split Screen mode is available in Standard Screen mode.

To open this controller, select the Split DM command from the Scan menu.

Refer to <3.9.2 Split Screen and Dual Mag mode>

2 - 55