Delta Electronics VFD-E manual Afm

Chapter 4 Parameters

0=not used

Weights 1=Used by PLC

Bit	7 6 5 4 3 2 1 0	Relay 1
		MO1
		MO2/RA2
		MO3/RA3
		MO4/RA4
		MO5/RA5
		MO6/RA6
		MO7/RA7

For example: when Pr.03.09 is set to 3 (decimal) = 00000011 (binary) that indicates Relay1 and MO1 are used by PLC. (Pr.03.09= 20+21=3)

0=not used

Weights 1=Used by PLC

Bit	0 0 0 0 0 0 1 1	Relay 1
		MO1
		MO2/RA2
		MO3/RA3
		MO4/RA4
		MO5/RA5
		MO6/RA6
		MO7/RA7

03.10The Analog Output Used by PLC (NOT for VFD*E*C models)

Settings Read Only	Factory setting: ##
Bit0=1: AFM used by PLC
Bit1=1: AO1 used by PLC
Bit2=1: AO2 used by PLC

The equivalent 1-bit is used to display the status (used or not used) of each analog output. The value that Pr.03.10 displays is the result after converting 1-bit binary into decimal value.

Weights		0=not used
		1=Used by PLC
Bit	2 1 0
		AFM
		AO1 (optional)
		AO2 (optional)

For Example:

If Pr.03.10 displays 1, it means that AFM is used by PLC.

4-66 Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11