Delta Electronics VFD-E Power Supply, LEDs Display, LonWorks Communication Module CME-LW01, Step

Appendix B Accessories

Dimensions	STEP 1
	UNIT: mm(inch)

STEP 2

B.10.1.4 Power Supply

No external power is needed. Power is supplied via RS-485 port that is connected to VFD-E. An 8 pins RJ-45 cable, which is packed together with this communication module, is used to connect the RS-485 port between VFD-E and this communication module for power. This communication module will perform the function once it is connected. Refer to the following paragraph for LED indications.

B.10.1.5 LEDs Display

1.SP: Green LED means in normal condition, Red LED means abnormal condition.

2.Module: Green blinking LED means no I/O data transmission, Green steady LED means I/O data transmission OK.

Red LED blinking or steady LED means module communication is abnormal.

3.Network: Green LED means DeviceNet communication is normal, Red LED means abnormal

NOTE

Refer to user manual for detail information-- Chapter 5 Troubleshooting.

B.10.2 LonWorks Communication Module (CME-LW01)

B-26 Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11