Delta Electronics VFD-E manual AVI2

		Chapter 4 Parameters
Group 2 Operation Method Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
		0: Digital keypad UP/DOWN keys or Multi-
		function Inputs UP/DOWN. Last used
		frequency saved.
02.00	Source of First	1: 0 to +10V from AVI	1
	Master Frequency	2: 4 to 20mA from ACI or 0 to +10V from
	Command
		AVI2
		3: RS-485 (RJ-45)/USB communication
		4: Digital keypad potentiometer
		5: CANopen communication
		0: Digital keypad
		1: External terminals. Keypad STOP/RESET
		enabled.
		2: External terminals. Keypad STOP/RESET
	Source of First	disabled.
02.01	Operation	3: RS-485 (RJ-45)/USB communication.	1
	Command
		Keypad STOP/RESET enabled.
		4: RS-485 (RJ-45)/USB communication.
		Keypad STOP/RESET disabled.
		5: CANopen communication. Keypad
		STOP/RESET disabled.
		0: STOP: ramp to stop; E.F.: coast to stop
02.02	Stop Method	1: STOP: coast to stop; E.F.: coast to stop	0
		2: STOP: ramp to stop; E.F.: ramp to stop
		3: STOP: coast to stop; E.F.: ramp to stop
	PWM Carrier
02.03	Frequency	1 to 15kHz	8
	Selections
		0: Enable forward/reverse operation
02.04	Motor Direction	1: Disable reverse operation	0
	Control
		2: Disabled forward operation
02.05	Line Start Lockout	0: Disable. Operation status is not changed	1
		even if operation command source Pr.02.01
		is changed.
		1: Enable. Operation status is not changed
		even if operation command source Pr.02.01
		is changed.

Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11 4-7