Delta Electronics VFD-E manual Parameter Explanation Settings Factory Customer

		Chapter 4 Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
		0: AVR function enable
08.18	AVR Function	1: AVR function disable	0
		2: AVR function disable for decel.
		3: AVR function disable for stop
08.19	Software Brake	115V / 230V series: 370.0to 430.0V	380.0
	Level	460V series: 740.0 to 860.0V	760.0
08.20	Compensation	0.0~5.0	0.0
	Coefficient for Motor
	Instability
08.21	OOB Sampling Time	0.1 to 120.0 sec	1.0
08.22	Number of OOB	00 to 32	20
	Sampling Times
08.23	OOB Average	Read only	#.#
	Sampling Angle
08.24	DEB Function	0: Disable	0
		1: Enable
08.25	DEB Return Time	0 to 250 sec	0
Group 9 Communication Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
09.00	Communication	1 to 254	1
	Address
		0: Baud rate 4800bps
09.01	Transmission Speed	1: Baud rate 9600bps	1
		2: Baud rate 19200bps
		3: Baud rate 38400bps
		0: Warn and keep operating
09.02	Transmission Fault	1: Warn and ramp to stop	3
	Treatment	2: Warn and coast to stop
		3: No warning and keep operating

Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11 4-23