Delta Electronics VFD-E manual 12.05, 12.06, 12.07, 12.08, 12.09, 12.10

				Chapter 4 Parameters
12.05	Max. AVI3 Scale Percentage				Unit: 0.1
	Settings	0.0 to 100.0%			Factory Setting: 100.0
12.06	Min. ACI2 Input Current				Unit: 0.1
	Settings	0.0 to 20.0mA			Factory Setting: 4.0
12.07	Min. ACI2 Scale Percentage				Unit: 0.1
	Settings	0.0 to 100.0%			Factory Setting: 0.0
12.08	Max. ACI2 Input Current				Unit: 0.1
	Settings	0.0 to 20.0mA			Factory Setting: 20.0
12.09	Max. ACI2 Scale Percentage				Unit: 0.1
	Settings	0.0 to 100.0%			Factory Setting: 100.0
12.10	AI2 Function Selection
					Factory Setting: 0
	Settings	0	Disabled

1Source of the 1st frequency

2Source of the 2nd frequency

3PID Set Point (PID enable)

4Positive PID feedback

5Negative PID feedback

12.11AI2 Analog Signal Mode

Factory Setting: 1

Settings	0	ACI3 analog current (0.0 ~ 20.0mA)
	1	AVI4 analog voltage (0.0 ~ 10.0V)

Besides parameters settings, the voltage/current mode should be used with the switch.

Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11 4-145