Delta Electronics VFD-E manual Parameters

		Chapter 4 Parameters
Group 12: Analog Input/Output Parameters for Extension Card
Parameter	Explanation	Settings	Factory	Customer
			Setting
		0: Disabled
		1: Source of the 1st frequency
12.00	AI1 Function	2: Source of the 2nd frequency	0
	Selection	3: PID Set Point (PID enable)
		4: Positive PID feedback
		5: Negative PID feedback
12.01	AI1 Analog Signal	0: ACI2 analog current (0.0 ~ 20.0mA)	1
	Mode	1: AVI3 analog voltage (0.0 ~ 10.0V)
12.02	Min. AVI3 Input	0.0 to 10.0V	0.0
	Voltage
12.03	Min. AVI3 Scale	0.0 to 100.0%	0.0
	Percentage
12.04	Max. AVI3 Input	0.0 to 10.0V	10.0
	Voltage
12.05	Max. AVI3 Scale	0.0 to 100.0%	100.0
	Percentage
12.06	Min. ACI2 Input	0.0 to 20.0mA	4.0
	Current
12.07	Min. ACI2 Scale	0.0 to 100.0%	0.0
	Percentage
12.08	Max. ACI2 Input	0.0 to 20.0mA	20.0
	Current
12.09	Max. ACI2 Scale	0.0 to 100.0%	100.0
	Percentage
		0: Disabled
		1: Source of the 1st frequency
12.10	AI2 Function	2: Source of the 2nd frequency	0
	Selection	3: PID Set Point (PID enable)
		4: Positive PID feedback
		5: Negative PID feedback
12.11	AI2 Analog Signal	0: ACI3 analog current (0.0 ~ 20.0mA)	1
	Mode	1: AVI4 analog voltage (0.0 ~ 10.0V)

Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11 4-29