Delta Electronics VFD-E manual Group 11 Parameters for Extension Card

Chapter 4 Parameters

Parameter	Explanation	Settings	Factory	Customer
			Setting
10.02	Proportional Gain	0.0 to 10.0	1.0
	(P)
10.03	Integral Time (I)	0.00 to 100.0 sec (0.00=disable)	1.00
10.04	Derivative Control	0.00 to 1.00 sec	0.00
	(D)
10.05	Upper Bound for	0 to 100%	100
	Integral Control
10.06	Primary Delay Filter	0.0 to 2.5 sec	0.0
	Time
10.07	PID Output Freq	0 to 110%	100
	Limit
	PID Feedback
10.08	Signal Detection	0.0 to 3600 sec (0.0 disable)	60.0
	Time
	Treatment of the	0: Warn and RAMP to stop
10.09	Erroneous PID	1: Warn and COAST to stop	0
	Feedback Signals	2: Warn and keep operation
10.10	Gain Over the PID	0.0 to 10.0	1.0
	Detection Value
10.11	Source of PID Set	0.00 to 600.0Hz	0.00
	point
10.12	PID Offset Level	1.0 to 50.0%	10.0
10.13	Detection Time of	0.1 to 300.0 sec	5.0
	PID Offset
10.14	Sleep/Wake Up	0.0 to 6550 sec	0.0
	Detection Time
10.15	Sleep Frequency	0.00 to 600.0 Hz	0.00
10.16	Wakeup Frequency	0.00 to 600.0 Hz	0.00
10.17	Minimum PID	0: By PID control	0
	Output Frequency	1: By minimum output frequency (Pr.01.05)
	Selection

Group 11 Parameters for Extension Card

4-26 Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11