Delta Electronics VFD-E manual Group 7 Motor Parameters Explanation Settings, Fla

			Chapter 4 Parameters
Group 7 Motor Parameters
Parameter	Explanation	Settings		Factory	Customer
				Setting
07.00	Motor Rated Current	30 %FLA to 120% FLA		FLA
	(Motor 0)
07.01	Motor No-Load	0%FLA to 99% FLA		0.4*FLA
	Current (Motor 0)
	Torque
07.02	Compensation	0.0 to 10.0		0.0
	(Motor 0)
07.03	Slip Compensation	0.00 to 10.00		0.00
	(Used without PG)
	(Motor 0)
	Motor Parameters	0: Disable
07.04		1: Auto tuning R1		0
	Auto Tuning
		2: Auto tuning R1 + no-load test
	Motor Line-to-line	0~65535 mΩ		0
07.05	Resistance R1
	(Motor 0)
07.06	Motor Rated Slip	0.00 to 20.00 Hz		3.00
	(Motor 0)
07.07	Slip Compensation	0 to 250%		200
	Limit
	Torque
07.08	Compensation Time	0.01 ~10.00 Sec		0.10
	Constant
07.09	Slip Compensation	0.05 ~10.00 sec		0.20
	Time Constant
	Accumulative Motor
07.10	Operation Time	0 to 1439 Min.		0
	(Min.)
	Accumulative Motor
07.11	Operation Time	0 to 65535 Day		0
	(Day)
07.12	Motor PTC	0: Disable		0
	Overheat Protection	1: Enable
	Input Debouncing
07.13	Time of the PTC	0~9999(*2ms)		100
	Protection

Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11 4-19