Delta Electronics VFD-E manual Parameter Explanation Settings Factory Customer

Chapter 4 Parameters

Parameter	Explanation	Settings	Factory	Customer
			Setting
01.01	Maximum Voltage	0.10 to 600.0 Hz	60.00
	Frequency (Fbase)
	(Motor 0)
01.02	Maximum Output	115V/230V series: 0.1V to 255.0V	220.0
	Voltage (Vmax)	460V series: 0.1V to 510.0V	440.0
	(Motor 0)
01.03	Mid-Point Frequency	0.10 to 600.0 Hz	1.50
	(Fmid) (Motor 0)
01.04	Mid-Point Voltage	115V/230V series: 0.1V to 255.0V	10.0
	(Vmid) (Motor 0)	460V series: 0.1V to 510.0V	20.0
	Minimum Output
01.05	Frequency (Fmin)	0.10 to 600.0 Hz	1.50
	(Motor 0)
01.06	Minimum Output	115V/230V series: 0.1V to 255.0V	10.0
	Voltage (Vmin)	460V series: 0.1V to 510.0V	20.0
	(Motor 0)
01.07	Output Frequency	0.1 to 120.0%	110.0
	Upper Limit
01.08	Output Frequency	0.0 to100.0 %	0.0
	Lower Limit
01.09	Accel Time 1	0.1 to 600.0 / 0.01 to 600.0 sec	10.0
01.10	Decel Time 1	0.1 to 600.0 / 0.01 to 600.0 sec	10.0
01.11	Accel Time 2	0.1 to 600.0 / 0.01 to 600.0 sec	10.0
01.12	Decel Time 2	0.1 to 600.0 / 0.01 to 600.0 sec	10.0
01.13	Jog Acceleration	0.1 to 600.0 / 0.01 to 600.0 sec	1.0
	Time
01.14	Jog Deceleration	0.1 to 600.0 / 0.01 to 600.0 sec	1.0
	Time
01.15	Jog Frequency	0.10 Hz to Fmax (Pr.01.00) Hz	6.00
		0: Linear Accel/Decel
	Auto acceleration /	1: Auto Accel, Linear Decel
01.16	deceleration (refer	2: Linear Accel, Auto Decel	0
	to Accel/Decel time
		3: Auto Accel/Decel (Set by load)
	setting)
		4: Auto Accel/Decel (set by Accel/Decel
		Time setting)

4-4 Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11