Delta Electronics VFD-E manual MI7, MI8, MI9, 04.10

																	0=N.O									Chapter 4 Parameters
				Weights
																	1=N.C
				Bit				1	1		0	1	0	0
																	MI1
																	MI2
																	MI3
																	MI4
																	MI5
																	MI6
The setting value														NOTE:
= bit5x2			5	+bit4x2			4	+bit2x2		2
														2	14		=16384	2		13		=8192	2		12	=4096		2	11	=2048			2		10
= 1x2	5	+1x2			4	+1x2		2																											=1024
														2	9	=512		2		8	=256		2	7	=128			6				2		5	=32
=32+16+4 =52																												2 =64
															4				3				2					1				0
Setting 04.09														2		=16		2		=8			2 =4				2 =2				2		=1

When extension card is installed, the number of the multi-function input terminals will increase according to the extension card. The maximum number of the multi-function input terminals is shown as follows.

Weights												0=N.O
												1=N.C
Bit	11 10	9	8	7	6	5	4	3	2	1	0	MI1
												MI2
												MI3
												MI4
												MI5
												MI6
												MI7
												MI8
												MI9
												MI10
												MI11
												MI12

04.10	Digital Terminal Input Debouncing Time		Unit: 2ms
	Settings	1 to 20	Factory Setting: 1
	This parameter is to delay the signals on digital input terminals. 1 unit is 2 msec, 2 units are 4
	msec, etc. The delay time is to debounce noisy signals that could cause the digital terminals to
	malfunction.

Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11 4-81