Delta Electronics VFD-E manual Reserved 03.10

Chapter 4 Parameters

Parameter	Explanation	Settings	Factory	Customer
			Setting
		3: RS-485 (RJ-45)/USB communication.
		Keypad STOP/RESET enabled.
		4: RS-485 (RJ-45)/USB communication.
		Keypad STOP/RESET disabled.
		5: CANopen communication. Keypad
		STOP/RESET disabled.
		0: Digital keypad UP/DOWN keys or Multi-
		function Inputs UP/DOWN. Last used
		frequency saved.
	Source of Second	1: 0 to +10V from AVI
		2: 4 to 20mA from ACI or 0 to +10V from
02.09	Frequency		0
	Command	AVI2
		3: RS-485 (RJ-45)/USB communication
		4: Digital keypad potentiometer
		5: CANopen communication
		Read Only
	Display the Master	Bit0=1: by First Freq Source (Pr.02.00)
		Bit1=1: by Second Freq Source (Pr.02.09)
02.16	Freq Command		##
		Bit2=1: by Multi-input function
	Source
		Bit3=1: by PLC Freq command (NOT for
		VFD*E*C models)
		Read Only
	Display the	Bit0=1: by Digital Keypad
		Bit1=1: by RS485 communication
02.17	Operation		##
		Bit2=1: by External Terminal 2/3 wire mode
	Command Source
		Bit3=1: by Multi-input function
		Bit5=1: by CANopen communication
Group 3 Output Function Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
03.09	Reserved
03.10	Reserved
Group 4 Input Function Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
04.05	Multi-function Input	0: No function	1
	Terminal (MI3)	1: Multi-Step speed command 1

4-154 Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11