Delta Electronics VFD-E manual ACI/AVI2

Chapter 4 Parameters

When extension card is installed, the number of the digital input terminals will increase according to the extension card. The maximum number of the digital input terminals is shown as follows.

												0=not used
Weights												1=Used by PLC
Bit	11 10	9	8	7	6	5	4	3	2	1	0	MI1
												MI2
												MI3
												MI4
												MI5
												MI6
												MI7
												MI8
												MI9
												MI10
												MI11
												MI12

04.25The Analog Input Used by PLC (NOT for VFD*E*C models)

Settings	Read Only	Factory setting: ##
Display	Bit0=1: AVI used by PLC
	Bit1=1: ACI/AVI2 used by PLC
	Bit2=1: AI1 used by PLC
	Bit3=1: AI2 used by PLC

The equivalent 2-bit is used to display the status(used or not used) of each analog input. The value for Pr.04.25 to display is the result after converting 2-bit binary into decimal value.

Weights			0=not used
Bit	3	2 1 0	1=used by PLC
			AVI
			ACI/AVI2
			AI1 (optional)
			AI2 (optional)

Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11 4-83