Delta Electronics VFD-E manual Overheat Warning Applications Purpose, Wire

							Chapter 4 Parameters
Overheat Warning
Applications	Purpose				Functions					Related
										Parameters
Air conditioner	Safety measure	When AC motor drive overheats, it								03.00~03.01
		uses a thermal sensor to have								04.05~04.08
		overheat warning.
Two-wire/three-wire
Applications	Purpose				Functions					Related
										Parameters
		FWD/STOP					MI1:("OPEN":STOP)			02.00
							("CLOSE":FWD)			02.01
		REV/STOP					MI2:("OPEN": STOP)
										02.09
							("CLOSE": REV)
							DCM		VFD-E	04.04
	To run, stop,						MI1:("OPEN":STOP)
		RUN/STOP					("CLOSE":RUN)
General application	forward and	FWD/REV					MI2:("OPEN": FWD)
	reverse by external						("CLOSE": REV)
	terminals						DCM		VFD-E
			STOP RUN			3-wire
						MI1:("CLOSE":RUN)
						MI3:("OPEN":STOP)
						MI2:("OPEN": FWD)
				REV/FWD			("CLOSE": REV)
						DCM		VFD-E
Operation Command
Applications	Purpose				Functions					Related
										Parameters
General application	Selecting the	Selection of AC motor drive control by								02.01
	source of control	external terminals, digital keypad or								04.05~04.08
	signal	RS485.
Frequency Hold
Applications	Purpose				Functions					Related
										Parameters
General application	Acceleration/	Hold output frequency during								04.05~04.08
	deceleration pause	Acceleration/deceleration

Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11 4-33