Delta Electronics VFD-E manual Parameters

Chapter 4 Parameters

29Power Board Overheat (cF3.5)

30Control Board CPU WRITE failure (cF1.1)

31Contrsol Board CPU READ failure (cF2.1)

32ACI signal error (AErr)

33Reserved

34Motor PTC overheat protection (PtC1)

35-39 Reserved

40Communication time-out error of control board and power board (CP10)

In Pr.06.08 to Pr.06.12 the five most recent faults that occurred, are stored. After removing the

cause of the fault, use the reset command to reset the drive.

Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11 4-95